Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Alathon® M5370 - (PE-HD) - LyondellBasell Industries

Material Data Center offers the following functions for Alathon® M5370:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Alathon datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Otras propiedades
Any use of this information falls under the rules of our disclaimer.
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ASTM Data
Índice de fluidez, MFI 6.9 g/10min ASTM D 1238
Temperatura 190 °C -
Carga 2.16 kg -
Propiedades mecánicasValorUnidadesMétodo de ensayo
ASTM Data
Módulo de tracción 1040 MPa ASTM D 638
Esfuerzo de fluencia a tracción 28.5 MPa ASTM D 638
Esfuerzo de fractura a tracción 20.6 MPa ASTM D 638
Alargamiento a la fluencia 9 % ASTM D 638
Alargamiento a la rotura 1150 % ASTM D 638
Módulo de flexión 1410 MPa ASTM D 790
Dureza D Shore 71 - ASTM D 2240
Resistencia al impacto Izod con entalla, 1/8 in 39 J/m ASTM D 256
Propiedades térmicasValorUnidadesMétodo de ensayo
ASTM Data
Estabilidad al calor @ 66 psi 72 °C ASTM D 648
Temperatura de fusión 130 °C ASTM D 3418
Temperatura Vicat 127 °C ASTM D 1525
Otras propiedadesValorUnidadesMétodo de ensayo
Densidad 953 kg/m³ ASTM D 792
Bulk Density 561 kg/m³ -
Características
Procesamiento y forma de entrega
Moldeo por inyección
Características especiales
Alto impacto o modificado al impacto
Características
Estabilidad de color, Bajo olor, Copolímero
Applicaciones
Empacado
Disponibilidad regional
Norteamérica
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.