Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ACRYLITE® Satinice ZD23 - PMMA - Evonik CYRO LLC

Material Data Center offers the following functions for ACRYLITE® Satinice ZD23:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Acrylite datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ASTM Data
Índice de fluidez, MFI 3.1 g/10min ASTM D 1238
Temperatura 230 °C -
Carga 3.8 kg -
Contracción posterior al moldeo, paralelo 0.0045 mm/mm ASTM D 955
Propiedades mecánicasValorUnidadesMétodo de ensayo
ASTM Data
Módulo de tracción 1700 MPa ASTM D 638
Esfuerzo de tracción 44.1 MPa ASTM D 638
Alargamiento a la fluencia 4 % ASTM D 638
Alargamiento a la rotura 20 % ASTM D 638
Módulo de flexión 1800 MPa ASTM D 790
Resistencia a la flexión 69 MPa ASTM D 790
Dureza Rockwell M 44 - ASTM D 785
Resistencia al impacto Izod con entalla, 1/4 in 52.5 J/m ASTM D 256
Resistencia al impacto Izod con entalla, baja temperatura 26.3 J/m ASTM D 256
Temperatura 0 °C -
Propiedades térmicasValorUnidadesMétodo de ensayo
ASTM Data
Combustibilidad UL 94 HB - UL 94
Coeficiente de dilatación térmica, long. 72 E-6/K ASTM D 696
Temperatura Vicat 108 °C ASTM D 1525
Propiedades opticasValorUnidadesMétodo de ensayo
ASTM Data
Opacidad 96 % ASTM D 1003
Transmitancia luminosa 85 % ASTM D 1003
Índice de refracción 1.49 - ASTM D 542
Otras propiedadesValorUnidadesMétodo de ensayo
Absorción de agua, equilibrio 0.3 % ASTM D 570
Densidad 1150 kg/m³ ASTM D 792
Bulk Density 710 kg/m³ -
Características
Procesamiento y forma de entrega
Moldeo por inyección
Características especiales
Alto impacto o modificado al impacto, Estable contra rayos U.V./interperie
Características
Light Diffusing, Light Guiding
Certifications
Contacto con alimentos, Aprobación a contacto con alimentos 10/2011, Aprobado por el FDA 21 CFR
Applicaciones
Automotriz
Disponibilidad regional
Norteamérica
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.