Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Tritan™ TX1800 - Copolyester - Eastman Chemical Co.

Material Data Center offers the following functions for Tritan™ TX1800:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Tritan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Propiedades opticas - Otras propiedades
Any use of this information falls under the rules of our disclaimer.
Texto del producto

Eastman Tritan™ TX 1800 copolyester is an amorphous copolyester specifically developed for use in blow molding and profile extrusion applications. Its most outstanding features are excellent toughness, hydrolytic stability, heat

resistance, and chemical resistance. In addition, this new generation copolyester offers excellent appearance and clarity. Eastman Tritan™ TX1800 copolyester may be used in repeated use food contact articles under United States Food and Drug Administration (FDA) regulations.

This product is certified to NSF/ANSI Standard 51 for Food Equipment Materials.

Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ASTM Data
Contracción posterior al moldeo, paralelo 0.006 mm/mm ASTM D 955
Propiedades mecánicasValorUnidadesMétodo de ensayo
ISO Data
Módulo de tracción 1570 MPa ISO 527
Esfuerzo de fluencia 45 MPa ISO 527
Alarg. en límite elástico 7 % ISO 527
Resistencia a la tracción 51 MPa ISO 527
Alargamiento a rotura 142 % ISO 527
Módulo de flexión, 23°C 1490 MPa ISO 178
Resistencia a la flexión 60 MPa ISO 178
Resistencia al impacto Izod con entalla, +23°C 78 kJ/m² ISO 180/1A
Resistencia al impacto Izod con entalla 12 kJ/m² ISO 180/1A
Temperatura -40 °C -
ASTM Data
Módulo de tracción 1609 MPa ASTM D 638
Esfuerzo de fluencia a tracción 45 MPa ASTM D 638
Esfuerzo de fractura a tracción 52 MPa ASTM D 638
Alargamiento a la fluencia 7 % ASTM D 638
Alargamiento a la rotura 139 % ASTM D 638
Módulo de flexión 1522 MPa ASTM D 790
Dureza Rockwell R 110 - ASTM D 785
Resistencia al impacto Izod con entalla, 1/8 in 842 J/m ASTM D 256
Resistencia al impacto Izod, 1/8 in N J/m ASTM D 256
Propiedades térmicasValorUnidadesMétodo de ensayo
ASTM Data
Estabilidad al calor @ 66 psi 101 °C ASTM D 648
Estabilidad al calor @ 264 psi 85 °C ASTM D 648
Propiedades opticasValorUnidadesMétodo de ensayo
ASTM Data
Opacidad 1 % ASTM D 1003
Transmitancia luminosa 91 % ASTM D 1003
Otras propiedadesValorUnidadesMétodo de ensayo
Densidad 1180 kg/m³ ASTM D 792
Características
Procesamiento y forma de entrega
Extrusión de perfiles, Moldeo por soplado
Características especiales
Alto impacto o modificado al impacto, Estable contra el calor, Transparente
Características
Amorfo, Copolímero
Resistencia quimica
Resistencia química general, Estabilidad hidrolitica
Certifications
Contacto con alimentos, Aprobado por el FDA 21 CFR, Aprobado por el NSF 51
Applicaciones
Automotriz, Construcción, Empacado, Equipos deportivos
Disponibilidad regional
Norteamérica, Europa, Asia Pacifico, América del Sur y Centroaméric, Próximo Oriente/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.