Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Quantum Lytex 64690 - EP-CF50 - LyondellBasell Industries

Material Data Center offers the following functions for Quantum Lytex 64690:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Quantum datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Mechanical properties - Thermal properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Product Texts
Lytex 64690 BK is a chopped carbon fiber reinforced molding compound. It is easily moldable and provides parts that are high strength, fatigue resistant, with zero VOC and a low density. The carbon fiber is standard modulus PAN based 12K tow.
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 33000 MPa ISO 527
Stress at break 190 MPa ISO 527
Charpy impact strength, +23°C 80 kJ/m² ISO 179/1eU
Thermal propertiesValueUnitTest Standard
ISO Data
Temp. of deflection under load, 1.80 MPa 200 °C ISO 75-1/-2
Other propertiesValueUnitTest Standard
Density 1500 kg/m³ ISO 1183
Characteristics
Processing
Compression Molding
Delivery form
Sheet Molding Compound, Black
Features
Fatigue Resistance, Low Emission
Regional Availability
Europe
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.