Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Premium ABS - ABS - Formfutura BV

Material Data Center offers the following functions for Premium ABS:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Premium datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt volume-flow rate, MVR 5.5 cm³/10min ISO 1133
Temperature 220 °C -
Load 10 kg -
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 1860 MPa ISO 527
Yield stress 36 MPa ISO 527
Nominal strain at break 9 % ISO 527
Izod notched impact strength, +23°C 29 kJ/m² ISO 180/1A
Ball indentation hardness 71 MPa ISO 2039-1
Other Standards[S]
Flexural modulus, 23°C 2150 MPa
Flexural strength 65.7 MPa
S: These properties are reported by the producer according standards that are different to our defaults.
Thermal propertiesValueUnitTest Standard
ISO Data
Melting temperature, 10°C/min 145 °C ISO 11357-1/-3
Vicat softening temperature, A 92 °C ISO 306
Other propertiesValueUnitTest Standard
Water absorption 0.23 % Sim. to ISO 62
Humidity absorption 1.04 % Sim. to ISO 62
Density 1030 kg/m³ ISO 1183
Characteristics
Processing
Additive Manufacturing
Delivery form
Monofilament
Special Characteristics
High impact or impact modified
Features
Low Warpage, Thermal Stability
Regional Availability
Europe
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.