Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL™ Resin WM220A Asia - (PPE+PS)-GF20 - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for NORYL™ Resin WM220A Asia:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Noryl datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Electrical properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Product Texts
NORYL WM220A resin is a 20% glass fiber reinforced blend of polyphenylene ether (PPE) + Polystyrene (PS). This injection moldable grades exhibits excellent long term hydrolytic stability, very low water absorption, heat / hot water resistance and is an excellent candidate for a various water management applications such as pump housings, impellers and valves. See NORYL FE1520PW resin for NSF /ANSI 61 and global potable water compliant version.
Processing/Physical CharacteristicsValueUnitTest Standard
ASTM Data
Melt Flow Index, MFI 9.4 g/10min ASTM D 1238
Temperature 300 °C -
Load 5 kg -
Mold Shrinkage, MD 0.003 mm/mm ASTM D 955
Mechanical propertiesValueUnitTest Standard
ASTM Data
Flexural Modulus 5640 MPa ASTM D 790
Flexural Strength 150 MPa ASTM D 790
Rockwell Hardness R 124 - ASTM D 785
Izod Impact notched, 1/8 in 150 J/m ASTM D 256
Thermal propertiesValueUnitTest Standard
ASTM Data
DTUL @ 264 psi 141 °C ASTM D 648
Electrical propertiesValueUnitTest Standard
ASTM Data
Surface Resistivity 1E16 Ohm ASTM D 257
Other propertiesValueUnitTest Standard
Water Absorption, 24hr 0.06 % ASTM D 570
Density 1230 kg/m³ ASTM D 792
Characteristics
Processing
Injection Molding
Special Characteristics
Heat stabilized or stable to heat
Features
Amorphous, Low Warpage
Chemical Resistance
Hydrolytically Stable
Certifications
Food contact, Food approval NSF 51, Drinking water contact NSF 61
Applications
Building Construction
Regional Availability
Asia Pacific
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.