Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of MAGNUM™ 8391 - ABS - Trinseo

Material Data Center offers the following functions for MAGNUM™ 8391:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Magnum datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt flow index, MFI 28 g/10min ISO 1133
Temperature 220 °C -
Load 10 kg -
Molding shrinkage, parallel 0.6 % ISO 294-4, 2577
ASTM Data
Melt Flow Index, MFI 8 g/10min ASTM D 1238
Temperature 230 °C -
Load 3.8 kg -
Mold Shrinkage, MD 0.0055 mm/mm ASTM D 955
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 2340 MPa ISO 527
Yield stress 45 MPa ISO 527
Yield strain 2.5 % ISO 527
Flexural modulus, 23°C 2400 MPa ISO 178
Charpy notched impact strength, +23°C 19 kJ/m² ISO 179/1eA
Charpy notched impact strength, -30°C 9 kJ/m² ISO 179/1eA
Izod notched impact strength, +23°C 19 kJ/m² ISO 180/1A
Izod notched impact strength 9 kJ/m² ISO 180/1A
Temperature -30 °C -
ASTM Data
Tensile Strength at Yield 48 MPa ASTM D 638
Tensile Strength at Break 35 MPa ASTM D 638
Elongation at Yield 2.7 % ASTM D 638
Elongation at Break 8.7 % ASTM D 638
Flexural Modulus 2482 MPa ASTM D 790
Flexural Strength 75.2 MPa ASTM D 790
Rockwell Hardness R108 - ASTM D 785
Izod Impact notched, 1/8 in 235 J/m ASTM D 256
Thermal propertiesValueUnitTest Standard
ISO Data
Vicat softening temperature, B 95 °C ISO 306
Burning behav. at 1.5 mm nom. thickn. HB class IEC 60695-11-10
Thickness tested 1.5 mm -
Burning behav. at thickness h HB class IEC 60695-11-10
Thickness tested 3.0 mm -
ASTM Data
UL 94 Flame rating HB - UL 94
Thickness tested 1.5 mm -
DTUL @ 66 psi 87.2 °C ASTM D 648
DTUL @ 264 psi 73.9 °C ASTM D 648
Vicat Temperature 98.9 °C ASTM D 1525
Other propertiesValueUnitTest Standard
Density 1050 kg/m³ ISO 1183
Density 1050 kg/m³ ASTM D 792
Characteristics
Processing
Injection Molding
Features
Color Stability
Regional Availability
North America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.