Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Desmopan 9392A - TPU - Covestro Deutschland AG

Check here, which other Desmopan datasheets, application examples or technical articles are available in Material Data Center

Mechanical properties - Other properties - Processing Recommendation Injection Molding - Diagrams

Any use of this information falls under the rules of our disclaimer.

Product Texts

• Extrusion- and injection molding grade
• very good hydrolysis and microbial resistance
• good low-temperature flexibility
  Application:
• Hoses, non-reinforced
• Cable sheathings
• Profiles
• Technical parts

Mechanical properties	Value	Unit	Test Standard
ISO Data
Stress at 10% elongation	3.8	MPa	ISO 527
Stress at 100% elongation	10.6	MPa	ISO 527
Stress at 300% elongation	20	MPa	ISO 527
Stress at break TPE	49	MPa	ISO 527
Strain at break TPE	>300	%	ISO 527
Compression set at 70 °C, 24h	56	%	ISO 815
Tear strength	85	kN/m	ISO 34-1
Abrasion resistance	25	mm³	ISO 4649
Shore A hardness	92	-	ISO 7619-1
Shore D hardness	42	-	ISO 7619-1

Other properties	Value	Unit	Test Standard
Density	1150	kg/m³	ISO 1183

Processing Recommendation Injection Molding	Value	Unit	Test Standard
Pre-drying - Temperature	80	°C	-
Pre-drying - Time	1 - 2	h	-
Processing humidity	≤0.05	%	-
Melt temperature	210 - 230	°C	-
Mold temperature	20 - 40	°C	-

Diagrams

Characteristics

Processing

Injection Molding, Profile Extrusion, Sheet Extrusion, Other Extrusion

Regional Availability

North America, Europe, Asia Pacific, South and Central America, Near East/Africa

Other text information

Injection molding

PREPROCESSING
Max. water content: 0.05 %
Max. drying temperature: 80 °C
Drying time:
Dry air dryer 1-2 h

PROCESSING
Melt temperature: 210-230 °C
Mold temperature: 20-40 °C

Other extrusion

 Preprocessing

Max. Water content	≤0.05 %
Drying temperature	70-110 °C
Dry air dryer	1-2 h

 Processing

Melt temperature

195-215 °C

Profile extrusion

 Preprocessing

Max. Water content	≤0.05 %
Drying temperature	70-110 °C
Dry air dryer	1-2 h

 Processing

Melt temperature

195-215 °C

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.