Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Amilan® CM1016G-30 - PA6-GF30 - Toray Industries, Inc.

Material Data Center offers the following functions for Amilan® CM1016G-30:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Amilan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Electrical properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Thermal conductivity of melt 0.38 W/(m K) -
Spec. heat capacity of melt 1600 J/(kg K) -
Mechanical propertiesdry / condUnitTest Standard
ISO Data
Tensile Strength 185 / 105 MPa ISO 527
Strain at break 3 / 4 % ISO 527
Flexural modulus, 23°C 9500 / 5100 MPa ISO 178
Flexural modulus 4700 / 3500 MPa ISO 178
Flexural modulus temperature 80 °C -
Charpy impact strength, +23°C 80 / 100 kJ/m² ISO 179/1eU
Charpy notched impact strength, +23°C 15 / 22.5 kJ/m² ISO 179/1eA
Rockwell hardness R 120 - ISO 2039-2
Thermal propertiesdry / condUnitTest Standard
ISO Data
Melting temperature, 10°C/min 225 / * °C ISO 11357-1/-3
Temp. of deflection under load, 0.45 MPa 224 / * °C ISO 75-1/-2
Coeff. of linear therm. expansion, parallel 25 / * E-6/K ISO 11359-1/-2
Burning behav. at thickness h HB / * class IEC 60695-11-10
Thickness tested 0.8 / * mm -
Electrical propertiesdry / condUnitTest Standard
ISO Data
Relative permittivity, 1MHz 4 / 4.3 - IEC 62631-2-1
Dissipation factor, 1MHz 300 / 700 E-4 IEC 62631-2-1
Volume resistivity 1E13 / 1E10 Ohm*m IEC 62631-3-1
Electric strength 20 / 18 kV/mm IEC 60243-1
Other propertiesdry / condUnitTest Standard
Water absorption 6.4 / * % Sim. to ISO 62
Density 1360 / - kg/m³ ISO 1183
Characteristics
Special Characteristics
Heat stabilized or stable to heat
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.