Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Treva™ GC6011NAT - CAP - Eastman Chemical Co.

Material Data Center offers the following functions for Treva™ GC6011NAT:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Treva datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Product Texts

Eastman TREVA™ is a cellulose-based engineering bioplastic that offers both high performance and enables exceptional depth of color and high gloss for opaque applications. TREVA is chemically resistant, dimensionally stable and has excellent flow, BPA-free and enables exceptional depth of color and high gloss for opaque

applications.

Processing/Physical CharacteristicsValueUnitTest Standard
ASTM Data
Mold Shrinkage, MD 0.007 mm/mm ASTM D 955
Mechanical propertiesValueUnitTest Standard
ASTM Data
Tensile Strength at Yield 55 MPa ASTM D 638
Tensile Strength at Break 51 MPa ASTM D 638
Elongation at Break 21 % ASTM D 638
Flexural Modulus 2160 MPa ASTM D 790
Rockwell Hardness R 108 - ASTM D 785
Izod Impact notched, 1/8 in 82 J/m ASTM D 256
Izod Impact notched, Low-Temperature 66 J/m ASTM D 256
Temperature -40 °C -
Thermal propertiesValueUnitTest Standard
ASTM Data
DTUL @ 66 psi 116 °C ASTM D 648
DTUL @ 264 psi 102 °C ASTM D 648
Vicat Temperature 131 °C ASTM D 1525
Other propertiesValueUnitTest Standard
Biobased content 45 % -
Water Absorption, 24hr 2.3 % ASTM D 570
Density 1230 kg/m³ ASTM D 792
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 75 °C -
Pre-drying - Time 4 h -
Melt temperature 260 °C -
Mold temperature 85 °C -
Injection speed 30 mm/s -
Maximum residence time 4 min -
Characteristics
Processing
Injection Molding
Delivery form
Natural Color
Special Characteristics
Opaque
Features
High Gloss, Low Birefringence
Chemical Resistance
General Chemical Resistance
Certifications
Contains renewable resources
Applications
Packaging
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.