Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of TORAYCON® 1200MF - PBT - Toray Industries, Inc.

Material Data Center offers the following functions for TORAYCON® 1200MF:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Toraycon datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Product Texts
This material is also produced by Toray Plastics (Malaysia).
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt volume-flow rate, MVR 16 cm³/10min ISO 1133
Temperature 250 °C -
Load 2.16 kg -
ASTM Data
Melt Flow Index, MFI 8.7 g/10min ASTM D 1238
Temperature 250 °C -
Load 1 kg -
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Strength 58 MPa ISO 527
Strain at break >50 % ISO 527
Flexural modulus, 23°C 2400 MPa ISO 178
Charpy notched impact strength, +23°C 5.1 kJ/m² ISO 179/1eA
ASTM Data
Tensile Strength 54 MPa ASTM D 638
Elongation at Break 150 % ASTM D 638
Flexural Modulus 2500 MPa ASTM D 790
Flexural Strength 82 MPa ASTM D 790
Izod Impact notched, 1/8 in 52 J/m ASTM D 256
Thermal propertiesValueUnitTest Standard
ISO Data
Melting temperature, 10°C/min 224 °C ISO 11357-1/-3
ASTM Data
Melting Temperature 224 °C ASTM D 3418
Other propertiesValueUnitTest Standard
Density 1310 kg/m³ ISO 1183
Intrinsic Viscosity 1.23 dl/g -
Density 1310 kg/m³ ASTM D 792
Characteristics
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.