Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of TIPOLEN FD 243-55 - (PE-LD) - MOL Petrochemicals Co. Ltd.

Material Data Center offers the following functions for TIPOLEN FD 243-55:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Tipolen datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Optical properties - Other properties - Film Properties - Processing Recommendation Injection Molding - Processing Recommendation Extrusion
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt flow index, MFI 4 g/10min ISO 1133
Temperature 190 °C -
Load 2.16 kg -
Mechanical propertiesValueUnitTest Standard
ISO Data
Shore D hardness 48 - ISO 7619-1
Thermal propertiesValueUnitTest Standard
ISO Data
Vicat softening temperature, A 92 °C ISO 306
Optical propertiesValueUnitTest Standard
ISO Data
Haze 9 - ISO 14782
Other propertiesValueUnitTest Standard
Density 922 kg/m³ ISO 1183
Film PropertiesValueUnitTest Standard
ISO Data
Maximum stress, parallel 21 MPa ISO 527-3
Maximum stress, normal 15 MPa ISO 527-3
Maximum strain, parallel 270 % ISO 527-3
Maximum strain, normal 560 % ISO 527-3
Dart drop A 80 g ISO 7765-1
Type of extrusion blown - -
Thickness of specimen 0.04 mm -
Processing Recommendation Injection MoldingValueUnitTest Standard
Melt temperature 150 - 190 °C -
Processing Recommendation ExtrusionValueUnitTest Standard
Melt temperature 150 - 190 °C -
Characteristics
Processing
Injection Molding, Blown Film Extrusion, Film Extrusion
Delivery form
Pellets
Additives
Antiblocking agent
Special Characteristics
Transparent
Certifications
Food contact, Food approval 1935/2004/EC, Food approval 10/2011, Food approval FDA 21 CFR, RoHS compliant
Applications
Electrical and Electronical, Packaging
Regional Availability
Europe
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.