Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of TERRYL® PA510 - PA* - Cathay Industrial Biotech Ltd.

Material Data Center offers the following functions for TERRYL® PA510:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Terryl datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Mechanical properties - Thermal properties - Electrical properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 2000 MPa ISO 527
Yield stress 60 MPa ISO 527
Yield strain 100 % ISO 527
Flexural modulus, 23°C 1600 MPa ISO 178
Charpy notched impact strength, +23°C 7 kJ/m² ISO 179/1eA
Izod notched impact strength, +23°C 7.3 kJ/m² ISO 180/1A
Thermal propertiesValueUnitTest Standard
ISO Data
Melting temperature, 10°C/min 218 °C ISO 11357-1/-3
Temp. of deflection under load, 1.80 MPa 60 °C ISO 75-1/-2
Electrical propertiesValueUnitTest Standard
ISO Data
Volume resistivity 1E11 Ohm*m IEC 62631-3-1
Other propertiesValueUnitTest Standard
Humidity absorption 0.45 % Sim. to ISO 62
Density 1060 kg/m³ ISO 1183
Biobased content 100 % -
Characteristics
Processing
Injection Molding, Other Extrusion
Features
Barrier Properties
Certifications
Contains renewable resources
Applications
Automotive, Electrical and Electronical, Sports Equipment
Regional Availability
Asia Pacific
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.