Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Tenite™ Propionate 307A4000015 - CAP - Eastman Chemical Co.

Material Data Center offers the following functions for Tenite™ Propionate 307A4000015:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Tenite datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Electrical properties - Optical properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Product Texts

Tenite™ cellulosic plastics are noted for their excellent balance of properties - toughness, hardness, strength, surface gloss, clarity, and a warm feel. The mechanical properties if Tenite™ cellulosic plastics differ with plasticizer levels. Lower plasticizer content yields a harder surface, higher heat resistance, greater rigidity, higher tensile strength, and better dimensional stability. Higher plasticizer content increases impact strength. Tenite™ cellulosic plastics are available in natural, clear, selected ambers or smoke transparents and black translucent.

Color concentrates are available in let-down ratios from 10:1 to 40:1. Tenite™ Cellulosic Acetate Propionate 307-15 has a plasticizer level of 15%.




Processing/Physical CharacteristicsValueUnitTest Standard
ASTM Data
Mold Shrinkage, MD 0.004 mm/mm ASTM D 955
Mechanical propertiesValueUnitTest Standard
ASTM Data
Tensile Strength at Yield 26.9 MPa ASTM D 638
Tensile Strength at Break 31 MPa ASTM D 638
Elongation at Break 35 % ASTM D 638
Flexural Modulus 1344 MPa ASTM D 790
Rockwell Hardness R 72 - ASTM D 785
Izod Impact notched, 1/8 in 443 J/m ASTM D 256
Izod Impact notched, Low-Temperature 96 J/m ASTM D 256
Temperature -40 °C -
Thermal propertiesValueUnitTest Standard
ASTM Data
Coefficient of Thermal Expansion, MD 140 E-6/K ASTM D 696
DTUL @ 66 psi 80 °C ASTM D 648
DTUL @ 264 psi 71 °C ASTM D 648
Vicat Temperature 92 °C ASTM D 1525
Thermal Conductivity, solid state 0.036 W/(m K) ASTM C 177
Electrical propertiesValueUnitTest Standard
ASTM Data
Dielectric Strength, Short Time 15.3 kV/mm ASTM D 149
Dissipation Factor, 1 MHz 0.08 - ASTM D 150
Dielectric Constant, 1 MHz 3.55 - ASTM D 150
Volume Resistivity 1E15 Ohm*cm ASTM D 257
Optical propertiesValueUnitTest Standard
ASTM Data
Haze 8.5 % ASTM D 1003
Index of Refraction 1.48 - ASTM D 542
Other propertiesValueUnitTest Standard
Water Absorption, 24hr 1.5 % ASTM D 570
Density 1190 kg/m³ ASTM D 792
Characteristics
Processing
Profile Extrusion
Additives
Plasticizer
Special Characteristics
U.V. stabilized or stable to weather, Transparent
Features
High Gloss
Certifications
Contains renewable resources
Applications
Sports Equipment
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.