Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of TENAC™-C HC350 - POM - Asahi Kasei

Material Data Center offers the following functions for TENAC™-C HC350:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Tenac datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Electrical properties - Other properties - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt volume-flow rate, MVR 2.4 cm³/10min ISO 1133
Temperature 190 °C -
Load 2.16 kg -
Melt flow index, MFI 2.8 g/10min ISO 1133
ASTM Data
Melt Flow Index, MFI 3 g/10min ASTM D 1238
Temperature 190 °C -
Load 2.16 kg -
Mold Shrinkage, MD 0.016 mm/mm ASTM D 955
Mold Shrinkage, TD 0.02 mm/mm ASTM D 955
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 2650 MPa ISO 527
Yield stress 66 MPa ISO 527
Strain at break 40 % ISO 527
Flexural modulus, 23°C 2550 MPa ISO 178
Charpy notched impact strength, +23°C 9 kJ/m² ISO 179/1eA
ASTM Data
Tensile Strength 65 MPa ASTM D 638
Elongation at Break 40 % ASTM D 638
Flexural Modulus 2550 MPa ASTM D 790
Flexural Strength 93 MPa ASTM D 790
Rockwell Hardness M 90 - ASTM D 785
Izod Impact notched, 1/8 in 96 J/m ASTM D 256
Thermal propertiesValueUnitTest Standard
ISO Data
Temp. of deflection under load, 1.80 MPa 102 °C ISO 75-1/-2
Temp. of deflection under load, 0.45 MPa 160 °C ISO 75-1/-2
Coeff. of linear therm. expansion, parallel 100 E-6/K ISO 11359-1/-2
Burning Behav. at 1.5 mm nom. thickn. HB class IEC 60695-11-10
Burning Behav. at thickness h HB class IEC 60695-11-10
Thickness tested 0.8 mm -
Yellow Card available yes - -
ASTM Data
UL 94 Flame rating HB - UL 94
DTUL @ 66 psi 163 °C ASTM D 648
DTUL @ 264 psi 124 °C ASTM D 648
Electrical propertiesValueUnitTest Standard
ASTM Data
Surface Resistivity 1E17 Ohm ASTM D 257
Volume Resistivity 1E16 Ohm*cm ASTM D 257
Other propertiesValueUnitTest Standard
Density 1410 kg/m³ ISO 1183
Water Absorption, 24hr 0.2 % ASTM D 570
Density 1410 kg/m³ ASTM D 792
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 80 - 90 °C -
Pre-drying - Time 3 - 4 h -
Melt temperature 180 - 210 °C -
Mold temperature 60 °C -
Characteristics
Processing
Injection Molding
Delivery form
Pellets
Features
Copolymer
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.