Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Teflon™ FEP 9302 - FEP - The Chemours Company

Material Data Center offers the following functions for Teflon™ FEP 9302:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Teflon datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Electrical properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
Other Standards[S]
Melt Flow Index, MFI 3 g/10min ASTM D 2116
Temperature 372 °C -
Load 5 kg -
S: These properties are reported by the producer according standards that are different to our defaults.
Mechanical propertiesValueUnitTest Standard
ISO Data
Izod notched impact strength, +23°C N kJ/m² ISO 180/1A
ASTM Data
Tensile Strength 30 MPa ASTM D 638
Shore D Hardness 56 - ASTM D 2240
Thermal propertiesValueUnitTest Standard
ASTM Data
UL 94 Flame rating V-0 - UL 94
Melting Temperature 260 °C ASTM D 3418
Limiting Oxygen Index 95 % ASTM D 2863
Other Standards[S]
Max. Service Temp., Continous 204 °C -
S: These properties are reported by the producer according standards that are different to our defaults.
Electrical propertiesValueUnitTest Standard
ASTM Data
Dielectric Strength, Short Time 100 kV/mm ASTM D 149
Other propertiesValueUnitTest Standard
Water Absorption, 24hr 0.01 % ASTM D 570
Density 2140 kg/m³ ASTM D 792
Characteristics
Processing
Pipe/Tube Extrusion, Wire/Cable Extrusion, Other Extrusion, Blow Molding, Transfer Molding, Compression Molding
Delivery form
Pellets
Special Characteristics
U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Features
Tribologic Grade, Copolymer
Chemical Resistance
General Chemical Resistance, Environmental Stress Crack Resistance
Certifications
Food contact, Food approval 10/2011, Food approval FDA 21 CFR
Regional Availability
North America, Europe, Asia Pacific, South and Central America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.