Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Technipol® Bio 1160 - Polyester - Sipol spa Società Italiana Polimeri

Material Data Center offers the following functions for Technipol® Bio 1160:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Technipol datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Product Texts

Technipol® Bio 1160 is an aromatic - aliphatic copolyester, characterized by medium crystallinity and a low melting point. Due to its formulation, it can be used in biodegradable and compostable compounds. Furthermore it exhibits a good compatibility with other biodegradable polymers as polylactic acid and starch. It can be used as support polymer for master-batches both in granules and in powder form. Usable for injection molding.

Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt flow index, MFI 20 g/10min ISO 1133
Temperature 160 °C -
Load 2.16 kg -
Mechanical propertiesValueUnitTest Standard
ISO Data
Stress at break 17 MPa ISO 527
Strain at break 365 % ISO 527
Shore D hardness 34 - ISO 7619-1
Thermal propertiesValueUnitTest Standard
ISO Data
Melting temperature, 10°C/min 115 °C ISO 11357-1/-3
Other propertiesValueUnitTest Standard
Density 1230 kg/m³ ISO 1183
Characteristics
Processing
Injection Molding
Features
Blending Resin, Copolymer
Certifications
Contains renewable resources, Biodegradable
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.