Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of TECACOMP® PPA LDS black 4109 - PPA - Ensinger Compounds

Material Data Center offers the following functions for TECACOMP® PPA LDS black 4109:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Tecacomp datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Electrical properties - Other properties - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt volume-flow rate, MVR 20.6 cm³/10min ISO 1133
Temperature 300 °C -
Load 5 kg -
Melt flow index, MFI 31.7 g/10min ISO 1133
Temperature 300 °C -
Load 5 kg -
Molding shrinkage, parallel 0.6 % ISO 294-4, 2577
Molding shrinkage, normal 0.6 % ISO 294-4, 2577
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 9000 MPa ISO 527
Tensile Strength 43 MPa ISO 527
Strain at break 0.5 % ISO 527
Charpy impact strength, +23°C 5 kJ/m² ISO 179/1eU
Thermal propertiesValueUnitTest Standard
ISO Data
Melting temperature, 10°C/min 300 °C ISO 11357-1/-3
Glass transition temperature, 10°C/min 120 °C ISO 11357-1/-2
Temp. of deflection under load, 1.80 MPa 222 °C ISO 75-1/-2
Coeff. of linear therm. expansion, parallel 33 E-6/K ISO 11359-1/-2
Coeff. of linear therm. expansion, normal 34 E-6/K ISO 11359-1/-2
Burning behav. at thickness h HB class IEC 60695-11-10
Electrical propertiesValueUnitTest Standard
ISO Data
Comparative tracking index 600 - IEC 60112
Other Standards[S]
Volume resistivity 5.2E11 Ohm*m IEC 61340-2-3
Surface resistivity 4.7E12 Ohm
S: These properties are reported by the producer according standards that are different to our defaults.
Other propertiesValueUnitTest Standard
Humidity absorption 0.1 % Sim. to ISO 62
Density 1540 kg/m³ ISO 1183
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 120 °C -
Pre-drying - Time 4 - 8 h -
Processing humidity ≤0.1 % -
Melt temperature 300 - 330 °C -
Mold temperature 150 - 170 °C -
Zone 1 320 - 340 °C -
Characteristics
Processing
Injection Molding
Delivery form
Pellets, Black
Special Characteristics
Thermally Conductive
Features
Laser Markable
Applications
Automotive, Electrical and Electronical
Regional Availability
North America, Europe, Asia Pacific, South and Central America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.