Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of TAIRILAC® ANC180-B - ABS - Formosa Chemicals & Fibre Corp.

Material Data Center offers the following functions for TAIRILAC® ANC180-B:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Tairilac datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Other properties - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt flow index, MFI 5 g/10min ISO 1133
Temperature 200 °C -
Load 5 kg -
ASTM Data
Melt Flow Index, MFI 5 g/10min ASTM D 1238
Temperature 200 °C -
Load 5 kg -
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Strength 39 MPa ISO 527
Flexural modulus, 23°C 2400 MPa ISO 178
Flexural strength 63 MPa ISO 178
Izod notched impact strength, +23°C 18 kJ/m² ISO 180/1A
Rockwell hardness R 102 - ISO 2039-2
ASTM Data
Tensile Strength 39.2 MPa ASTM D 638
Flexural Modulus 2158 MPa ASTM D 790
Flexural Strength 63.8 MPa ASTM D 790
Rockwell Hardness R 102 - ASTM D 785
Izod Impact notched, 1/4 in 157 J/m ASTM D 256
Thermal propertiesValueUnitTest Standard
ISO Data
Vicat softening temperature, B 84 °C ISO 306
Burning behav. at 1.5 mm nom. thickn. V-0 class IEC 60695-11-10
Thickness tested 1.5 mm -
Yellow Card available yes - -
Burning behav. 5V at thickness h 5VB class IEC 60695-11-20
Thickness tested 2.0 mm -
Yellow Card available yes - -
ASTM Data
UL 94 Flame rating V-0 - UL 94
Thickness tested 1.5 mm -
DTUL @ 264 psi 83 °C ASTM D 648
Vicat Temperature 84 °C ASTM D 1525
Other propertiesValueUnitTest Standard
Density 1160 kg/m³ ASTM D 792
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 70 - 80 °C -
Pre-drying - Time 2 - 3 h -
Melt temperature 160 - 200 °C -
Mold temperature 40 - 70 °C -
Injection pressure 60 - 110 MPa -
Characteristics
Processing
Injection Molding
Delivery form
Black
Special Characteristics
Flame retardant
Features
High Gloss
Regional Availability
Asia Pacific
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.