Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of TPX® DX231 - PMP - Mitsui Chemicals America, Inc.

Material Data Center offers the following functions for TPX® DX231:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other TPX datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Electrical properties - Optical properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ASTM Data
Melt Flow Index, MFI 100 g/10min ASTM D 1238
Temperature 260 °C -
Load 5 kg -
Mechanical propertiesValueUnitTest Standard
ASTM Data
Tensile Modulus 1862 MPa ASTM D 638
Tensile Strength 25 MPa ASTM D 638
Tensile Strength at Yield 29 MPa ASTM D 638
Elongation at Break 14 % ASTM D 638
Flexural Modulus 1551 MPa ASTM D 790
Flexural Strength 43 MPa ASTM D 790
Rockwell Hardness R91 - ASTM D 785
Izod Impact notched, 1/8 in 18.1 J/m ASTM D 256
Thermal propertiesValueUnitTest Standard
ASTM Data
Coefficient of Thermal Expansion, MD 380 E-6/K ASTM D 696
DTUL @ 66 psi 126 °C ASTM D 648
Vicat Temperature 180 °C ASTM D 1525
Electrical propertiesValueUnitTest Standard
ASTM Data
Volume Resistivity 1E16 Ohm*cm ASTM D 257
Optical propertiesValueUnitTest Standard
ASTM Data
Haze 2.1 % ASTM D 1003
Light Transmittance 93 % ASTM D 1003
Index of Refraction 1.46 - ASTM D 542
Other propertiesValueUnitTest Standard
Density 833 kg/m³ ASTM D 792
Characteristics
Processing
Fiber Extrusion, Other Extrusion
Regional Availability
North America, Europe, Asia Pacific
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.