Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of SINKRAL® F 332 - ABS - Versalis S.p.A

Check here, which other Sinkral datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - Mechanical properties - Thermal properties - Electrical properties - Other properties - Test specimen production - Diagrams

Any use of this information falls under the rules of our disclaimer.

Product Texts

Symbol according to ISO 1043-1: ABS

Designation: Thermoplastics ISO 2580-ABS 1,MGN,105-15-16-20

SINKRAL F 332 is a general purpose injection moulding grade which combines excellent thermal stability during processing with a good balance between flow and impact characteristics.

Applications:

Thanks to its low yellow index and color constancy is suitable for self-coloring in a varity of industrial sectors like :
small household appliances, vacuum cleaners and telephones.

Processing/Physical Characteristics	Value	Unit	Test Standard
ISO Data
Melt volume-flow rate, MVR	14	cm³/10min	ISO 1133
Temperature	220	°C	-
Load	10	kg	-
Density of melt	960	kg/m³	-
Spec. heat capacity of melt	2150	J/(kg K)	-

Mechanical properties	Value	Unit	Test Standard
ISO Data
Tensile Modulus	2250	MPa	ISO 527
Yield stress	44	MPa	ISO 527
Yield strain	3	%	ISO 527
Nominal strain at break	30	%	ISO 527
Charpy impact strength, +23°C	160	kJ/m²	ISO 179/1eU
Charpy impact strength, -30°C	120	kJ/m²	ISO 179/1eU
Charpy notched impact strength, +23°C	14	kJ/m²	ISO 179/1eA
Charpy notched impact strength, -30°C	6	kJ/m²	ISO 179/1eA

Thermal properties	Value	Unit	Test Standard
ISO Data
Glass transition temperature, 10°C/min	107	°C	ISO 11357-1/-2
Temp. of deflection under load, 1.80 MPa	83	°C	ISO 75-1/-2
Vicat softening temperature, B	102	°C	ISO 306
Coeff. of linear therm. expansion, parallel	90	E-6/K	ISO 11359-1/-2
Burning Behav. at 1.5 mm nom. thickn.	HB	class	IEC 60695-11-10
Thickness tested	1.5	mm	-
Yellow Card available	yes	-	-

Electrical properties	Value	Unit	Test Standard
ISO Data
Relative permittivity, 1MHz	3.1	-	IEC 62631-2-1
Dissipation factor, 1MHz	150	E-4	IEC 62631-2-1
Volume resistivity	1E13	Ohm*m	IEC 62631-3-1
Surface resistivity	1E14	Ohm	IEC 62631-3-2
Electric strength	30	kV/mm	IEC 60243-1
Comparative tracking index	600	-	IEC 60112

Other properties	Value	Unit	Test Standard
Water absorption	0.6	%	Sim. to ISO 62
Humidity absorption	0.2	%	Sim. to ISO 62
Density	1040	kg/m³	ISO 1183

Test specimen production	Value	Unit	Test Standard
ISO Data
Processing conditions acc. ISO	2580	-	ISO ....-2
Injection Molding, melt temperature	250	°C	ISO 294
Injection Molding, mold temperature	60	°C	ISO 294
Injection Molding, injection velocity	200	mm/s	ISO 294
Injection Molding, pressure at hold	70	MPa	ISO 294

Diagrams

Characteristics

Processing

Injection Molding

Delivery form

Pellets

Special Characteristics

Heat stabilized or stable to heat

Regional Availability

North America, Europe, Asia Pacific, South and Central America, Near East/Africa

Other text information

Injection molding

Injection Molding
PREPROCESSING

Drying conditions:

    Drying temperature                80 °C

    Drying time                          2 - 4 h

    Maximum water content         0.2 %

PROCESSING

Typical processing temperature range:

    Melt temperature         230 - 270 °C

    Mold temperature          40  -  70 °C

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.