Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.
This is the free Material Data Center Datasheet of Repol SRM100NC - PP - Reliance Polymers
unit conversion, PDF datasheet print, comparison with other plastics
Check here, which other Repol datasheets, application examples or technical articles are available in Material Data Center
|Processing/Physical Characteristics||Value||Unit||Test Standard|
|Melt Flow Index||12||g/10min||ASTM D 1238|
|Mechanical properties||Value||Unit||Test Standard|
|Tensile Strength at Yield||30||MPa||ASTM D 638|
|Elongation at Yield||12||%||ASTM D 638|
|Izod Impact notched, 1/8 in||0.065||kJ/m||ASTM D 256|
|Thermal properties||Value||Unit||Test Standard|
|DTUL @ 66 psi||95||°C||ASTM D 648|
|Melting Temperature||150||°C||ASTM D 3418|
Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.
Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.