Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.
This is the free Material Data Center Datasheet of PLEXIGLAS® Optical POQ62 - PMMA - Röhm GmbH
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, parameters for material models, CAE Interfaces
Check here, which other Plexiglas datasheets, application examples or technical articles are available in Material Data Center
Productprofil:
PLEXIGLAS® Optical POQ62 is an amorphous thermoplastic molding compound based on polymethyl methacrylate (PMMA).
In addition to the familiar properties of PLEXIGLAS® molding compounds, such as
- excellent light transmission and brilliance,
- very good weather resistance,
- high mechanical strength, surface hardness and mar resistance,
PLEXIGLAS® Optical POQ62 is distinguished by its
- guaranteed purity and clarity,
- outstanding flow properties due to its low melt viscosity and its
- extremely accurate mold surface reproduction.
Application:
PLEXIGLAS® Optical POQ62 is particularly suitable for injection-compression molding and for injection-molding thin-walled parts with long flow paths. Further fields of application are two-component injection molding and special extrusion.
Example:
Manufacture of moldings with microstructured surfaces and optical structures.
Processing:
PLEXIGLAS® Optical POQ62 can be processed on injection molding machines and extruders with conventional three-section screws for engineering thermoplastics.
Physical Form / Packaging:
PLEXIGLAS® Optical POQ62 is supplied as uniform pellets in 500kg boxes with PE lining, other types of packaging on request.
Processing/Physical Characteristics | Value | Unit | Test Standard | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISO Data | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Melt volume-flow rate, MVR | 21 | cm³/10min | ISO 1133 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Temperature | 230 | °C | - | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Load | 3.8 | kg | - |
Mechanical properties | Value | Unit | Test Standard | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISO Data | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Tensile Modulus | 3300 | MPa | ISO 527 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Stress at break | 63 | MPa | ISO 527 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Strain at break | 2.8 | % | ISO 527 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Charpy impact strength, +23°C | 20 | kJ/m² | ISO 179/1eU |
Thermal properties | Value | Unit | Test Standard | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISO Data | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Vicat softening temperature, B | 97 | °C | ISO 306 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Coeff. of linear therm. expansion, parallel | 80 | E-6/K | ISO 11359-1/-2 |
Electrical properties | Value | Unit | Test Standard | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISO Data | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Volume resistivity | >1E13 | Ohm*m | IEC 62631-3-1 |
Optical properties | Value | Unit | Test Standard | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISO Data | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Luminous transmittance | 92 | % | ISO 13468-1, -2 |
Other properties | Value | Unit | Test Standard |
Water absorption | 1.7 | % | Sim. to ISO 62 |
Humidity absorption | 0.6 | % | Sim. to ISO 62 |
Density | 1190 | kg/m³ | ISO 1183 |
Test specimen production | Value | Unit | Test Standard | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISO Data | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Processing conditions acc. ISO | 8257 | - | ISO ....-2 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Injection Molding, mold temperature | 57 | °C | ISO 294 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Injection Molding, injection velocity | 195 | mm/s | ISO 294 |
Predrying temperature: max. 80 °C
Predrying time in a desiccant-type drier: 2 - 3 h
PROCESSING
Melt temperature: 280 - 290°C
Mold temperature:50 - 70°C
Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.
Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.