Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.
This is the free Material Data Center Datasheet of Monprene® IN-23090 XRD - TPS - Teknor Apex Co.
unit conversion, PDF datasheet print, comparison with other plastics
Check here, which other Monprene datasheets, application examples or technical articles are available in Material Data Center
The Monprene IN-23000 series of TPS compounds are UV stable, easily colorable, and exhibit excellent surface aesthetics and sealability. These materials are designed for extrusion and can be easily co-extruded with PP or other stiffer TPE backbone, making them suitable for seals in window profiles.
Adheres to PP
Property | Value | Unit | Standard |
---|---|---|---|
Apparent Viscosity (200 °C, 206 1/s) | 290 | Pas | ASTM D3835 |
Mechanical properties | Value | Unit | Test Standard | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ASTM Data | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Modulus at 100% Elongation | 5.5 | MPa | ASTM D 412 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Shore A Hardness | 90 | - | ASTM D 2240 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Tensile Strength at Break | 14.8 | MPa | ASTM D 412 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Elongation at Break | 650 | % | ASTM D 412 |
Other properties | Value | Unit | Test Standard |
Density | 1180 | kg/m³ | ASTM D 792 |
Processing Recommendation Injection Molding | Value | Unit | Test Standard |
Pre-drying - Temperature | 65 | °C | - |
Pre-drying - Time | 2 - 4 | h | - |
Melt temperature | 199 - 249 | °C | - |
Mold temperature | 35 - 49 | °C | - |
Zone 1 | 182 - 232 | °C | - |
Zone 2 | 188 - 238 | °C | - |
Zone 3 | 193 - 243 | °C | - |
Nozzle temperature | 199 - 249 | °C | - |
Screw speed | 50 - 100 | rpm | - |
Injection pressure | 1.38 - 5.52 | MPa | - |
Back pressure | 0.172 - 0.689 | MPa | - |
Processing Recommendation Extrusion | Value | Unit | Test Standard |
Zone 1 | 182 - 232 | °C | - |
Zone 2 | 188 - 238 | °C | - |
Zone 3 | 193 - 243 | °C | - |
Zone 4 | 199 - 249 | °C | - |
Zone 5 | 199 - 249 | °C | - |
Nozzle temperature | 199 - 249 | °C | - |
Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.
Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.