Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Monprene® IN-23050 XRD - TPS-X - Teknor Apex Co.

Material Data Center offers the following functions for Monprene® IN-23050 XRD:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Monprene datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Other properties - Processing Recommendation Extrusion
Any use of this information falls under the rules of our disclaimer.
Product Texts
Preliminary Data

The Monprene IN-23000 series of TPS compounds are UV stable, easily colorable, and exhibit excellent surface aesthetics and sealability. These materials are designed for extrusion and can be easily co-extruded with PP or other stiffer TPE backbone, making them suitable for seals in window profiles.

Adheres to PP

PropertyValueUnitStandard
Apparent Viscosity (200 °C, 206 1/s)250
PasASTM D3835
Processing/Physical CharacteristicsValueUnitTest Standard
ASTM Data
Melt Flow Index, MFI 3 g/10min ASTM D 1238
Temperature 200 °C -
Load 5 kg -
Mechanical propertiesValueUnitTest Standard
ASTM Data
Modulus at 100% Elongation 1.38 MPa ASTM D 412
Shore A Hardness 50 - ASTM D 2240
Tensile Strength at Break 8.62 MPa ASTM D 412
Elongation at Break 800 % ASTM D 412
Other propertiesValueUnitTest Standard
Density 1180 kg/m³ ASTM D 792
Processing Recommendation ExtrusionValueUnitTest Standard
Pre-drying - Temperature 65 °C -
Pre-drying - Time 2 - 4 h -
Zone 1 182 - 232 °C -
Zone 2 188 - 238 °C -
Zone 3 193 - 243 °C -
Zone 4 199 - 249 °C -
Zone 5 199 - 249 °C -
Nozzle temperature 199 - 249 °C -
Characteristics
Processing
Pipe/Tube Extrusion, Profile Extrusion, Other Extrusion
Delivery form
Pellets, Black
Special Characteristics
Light stabilized or stable to light, U.V. stabilized or stable to weather, Opaque
Features
Melt Strength
Applications
Building Construction
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.