Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Monprene® CP-10160 - TPE - Teknor Apex Co.

Material Data Center offers the following functions for Monprene® CP-10160:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Monprene datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Other properties - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Product Texts
Preliminary Data

The Monprene CP-10100 Series of thermoplastic elastomer compounds, available in NAT or colors, from 40 to 90 Shore A, are designed specifically for consumer product applications requiring a soft, rubber-like feel. Monprene CP-10160 is a medium hardness, low density, unfilled grade that is suitable for injection molding.

Adheres to PP

PropertyValueUnitStandard
Tensile Stress at 100% (across flow)1.65MPaISO 37
Tensile Stress at Break (across flow)10.4MPaISO 37
Tensile Strain at Break (across flow)880%ISO 37
Tear Strength (across flow)22kN/mISO 34-1
Apparent Shear Viscosity (200 °C)233PasASTM D3835
Processing/Physical CharacteristicsValueUnitTest Standard
ASTM Data
Melt Flow Index, MFI 4 g/10min ASTM D 1238
Temperature 200 °C -
Load 5 kg -
Mechanical propertiesValueUnitTest Standard
ISO Data
Compression set at 70 °C, 24h 35 % ISO 815
Tear strength 32 kN/m ISO 34-1
Shore A hardness 60 - ISO 7619-1
Other propertiesValueUnitTest Standard
Density 888 kg/m³ ASTM D 792
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 65 °C -
Pre-drying - Time 2 - 4 h -
Melt temperature 182 - 227 °C -
Mold temperature 27 - 49 °C -
Zone 1 160 - 177 °C -
Zone 2 182 - 204 °C -
Zone 3 193 - 216 °C -
Nozzle temperature 182 - 227 °C -
Screw speed 50 - 100 rpm -
Back pressure 0.172 - 0.689 MPa -
Characteristics
Processing
Injection Molding
Delivery form
Pellets
Special Characteristics
Translucent
Features
Good Adhesion, Soft Feel
Chemical Resistance
General Chemical Resistance
Applications
General Purpose, Sports Equipment
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.