Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of KEBATRON PPS L7020G1 - PPS-GF20 - Barlog plastics GmbH

Material Data Center offers the following functions for KEBATRON PPS L7020G1:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Kebatron datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 8000 MPa ISO 527
Stress at break 125 MPa ISO 527
Strain at break 2.1 % ISO 527
Charpy notched impact strength, +23°C 8 kJ/m² ISO 179/1eA
Thermal propertiesValueUnitTest Standard
ISO Data
Melting temperature, 10°C/min 280 °C ISO 11357-1/-3
Temp. of deflection under load, 1.80 MPa 240 °C ISO 75-1/-2
Coeff. of linear therm. expansion, parallel 29 E-6/K ISO 11359-1/-2
Coeff. of linear therm. expansion, normal 49 E-6/K ISO 11359-1/-2
Burning behav. at thickness h V-0 class IEC 60695-11-10
Thickness tested 0.4 mm -
Electrical propertiesValueUnitTest Standard
ISO Data
Volume resistivity 1E14 Ohm*m IEC 62631-3-1
Other propertiesValueUnitTest Standard
Water absorption 0.02 % Sim. to ISO 62
Density 1480 kg/m³ ISO 1183
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 120 - 140 °C -
Pre-drying - Time 4 - 8 h -
Processing humidity ≤0.02 % -
Melt temperature 320 - 340 °C -
Mold temperature 140 - 180 °C -
Injection pressure <1 MPa -
Characteristics
Processing
Injection Molding
Delivery form
Natural Color
Special Characteristics
Heat stabilized or stable to heat
Features
Laser Weldable
Chemical Resistance
General Chemical Resistance
Applications
Aircraft and Aerospace, Automotive, Electrical and Electronical, Encapsulation
Regional Availability
Europe
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.