Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Hylon® N1000EHL - PA66 - Ravago Manufacturing Americas

Material Data Center offers the following functions for Hylon® N1000EHL:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Hylon datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Electrical properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristicsdry / condUnitTest Standard
ISO Data
Molding shrinkage, parallel 1.6 / * % ISO 294-4, 2577
ASTM Data
Mold Shrinkage, MD 0.016 mm/mm ASTM D 955
Mechanical propertiesdry / condUnitTest Standard
ISO Data
Yield stress 84 / - MPa ISO 527
Strain at break 25 / - % ISO 527
Flexural modulus, 23°C 2850 / - MPa ISO 178
Izod notched impact strength, +23°C 5.3 / - kJ/m² ISO 180/1A
ASTM Data
Tensile Strength at Yield 82.7 / 65.5 MPa ASTM D 638
Elongation at Break 30 / 200 % ASTM D 638
Flexural Modulus 2960 / 1310 MPa ASTM D 790
Flexural Strength 114 / 40.7 MPa ASTM D 790
Rockwell Hardness M 85 / M 60 - ASTM D 785
Izod Impact notched, 1/8 in 53 / 130 J/m ASTM D 256
Thermal propertiesdry / condUnitTest Standard
ISO Data
Temp. of deflection under load, 1.80 MPa 73 / * °C ISO 75-1/-2
Temp. of deflection under load, 0.45 MPa 210 / * °C ISO 75-1/-2
ASTM Data
UL 94 Flame rating V-2 - UL 94
Thickness tested 0.711 mm -
DTUL @ 66 psi 238 °C ASTM D 648
DTUL @ 264 psi 88 °C ASTM D 648
Electrical propertiesdry / condUnitTest Standard
ASTM Data
Dielectric Strength, Short Time 23 / - kV/mm ASTM D 149
Volume Resistivity >1E15 / - Ohm*cm ASTM D 257
Other propertiesdry / condUnitTest Standard
Density 1140 / - kg/m³ ISO 1183
Water Absorption, 24hr 1.3 % ASTM D 570
Density 1140 kg/m³ ASTM D 792
Characteristics
Processing
Injection Molding
Delivery form
Pellets, Black, Natural Color
Additives
Lubricants
Special Characteristics
Heat stabilized or stable to heat
Applications
Automotive
Regional Availability
North America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.