Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Genestar™ GP2450NH-2 - PA9T-GF45 FR - Kuraray Co., Ltd.

Check here, which other Genestar datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - Mechanical properties - Thermal properties - Electrical properties - Other properties - Diagrams

Any use of this information falls under the rules of our disclaimer.

Product Texts

GENESTAR GP2450NH-2 is an injection molding grade with 45% GF developed for reflow applications. It is halogen-free and has a v0 flammability.

Thanks to its JEDEC MSL 1 rating (moisture sensitive level 1), this grade shows an excellent resistance to blisters.

GENESTAR GP2450NH-2 exhibits a good balance between mechanical properties, low warpage and a high processability, making it suitable for reflow components such as:

• DDR4 connectors
• USB 3.0 type C connectors
• wire-to-board and board-to-board connectors

Processing/Physical Characteristics	Value	Unit	Test Standard
ISO Data
Molding shrinkage, parallel	0.2	%	ISO 294-4, 2577
Molding shrinkage, normal	0.7	%	ISO 294-4, 2577

Mechanical properties	Value	Unit	Test Standard
ISO Data
Tensile Modulus	15100	MPa	ISO 527
Tensile Strength	150	MPa	ISO 527
Stress at break	146	MPa	ISO 527
Strain at break	1.5	%	ISO 527
Flexural modulus, 23°C	13900	MPa	ISO 178
Flexural strength	220	MPa	ISO 178
Charpy notched impact strength, +23°C	9.3	kJ/m²	ISO 179/1eA
ASTM Data
Tensile Strength	165	MPa	ASTM D 638
Flexural Modulus	13000	MPa	ASTM D 790
Flexural Strength	224	MPa	ASTM D 790
Izod Impact notched, 1/8 in	100	J/m	ASTM D 256

Thermal properties	Value	Unit	Test Standard
ISO Data
Melting temperature, 10°C/min	306	°C	ISO 11357-1/-3
Glass transition temperature, 10°C/min	125	°C	ISO 11357-1/-2
Temp. of deflection under load, 1.80 MPa	280	°C	ISO 75-1/-2
Burning Behav. at thickness h	V-0	class	IEC 60695-11-10
Thickness tested	0.4	mm	-
ASTM Data
UL 94 Flame rating	V-0	-	UL 94
DTUL @ 264 psi	285	°C	ASTM D 648
Melting Temperature	306	°C	ASTM D 3418
Glass Transition Temperature	125	°C	ASTM E 1356

Electrical properties	Value	Unit	Test Standard
ISO Data
Comparative tracking index	600	-	IEC 60112
ASTM Data
Dielectric Strength, Short Time	30	kV/mm	ASTM D 149
Volume Resistivity	>1E15	Ohm*cm	ASTM D 257

Other properties	Value	Unit	Test Standard
Water absorption	0.1	%	Sim. to ISO 62
Density	1530	kg/m³	ISO 1183
Density	1530	kg/m³	ASTM D 792

Diagrams

Characteristics

Processing

Injection Molding

Special Characteristics

Flame retardant, Halogen-free, Heat stabilized or stable to heat

Features

Low Warpage, Weldable

Applications

Electrical and Electronical

Regional Availability

North America, Europe, Asia Pacific, South and Central America, Near East/Africa

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.