Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Genestar™ GN2330-1 - PA9T-GF33 FR... - Kuraray Co., Ltd.

Check here, which other Genestar datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - Mechanical properties - Thermal properties - Electrical properties - Other properties - Diagrams

Any use of this information falls under the rules of our disclaimer.

Product Texts

Genestar GN2330-1 is one of standard grades.

Main feature of GN2300-1 is:
　-Good balance of mechanical strength, mold ability, and dimensional stability

Examples of applications are:
　-FPC Connectors
　-Board to Board / Wire to Board Connectors

Processing/Physical Characteristics	Value	Unit	Test Standard
ISO Data
Molding shrinkage, parallel	0.2	%	ISO 294-4, 2577
Molding shrinkage, normal	0.8	%	ISO 294-4, 2577
ASTM Data
Melt Flow Index, MFI	21	g/10min	ASTM D 1238
Temperature	320	°C	-
Load	2.16	kg	-

Mechanical properties	Value	Unit	Test Standard
ISO Data
Stress at break	184	MPa	ISO 527
Strain at break	1.8	%	ISO 527
Charpy notched impact strength, +23°C	11	kJ/m²	ISO 179/1eA
ASTM Data
Tensile Strength	185	MPa	ASTM D 638
Flexural Modulus	11000	MPa	ASTM D 790
Flexural Strength	240	MPa	ASTM D 790
Izod Impact notched, 1/8 in	100	J/m	ASTM D 256

Thermal properties	Value	Unit	Test Standard
ISO Data
Melting temperature, 10°C/min	306	°C	ISO 11357-1/-3
Glass transition temperature, 10°C/min	125	°C	ISO 11357-1/-2
Temp. of deflection under load, 1.80 MPa	285	°C	ISO 75-1/-2
Burning Behav. at 1.5 mm nom. thickn.	V-0	class	IEC 60695-11-10
Burning Behav. at thickness h	V-0	class	IEC 60695-11-10
Thickness tested	0.8	mm	-
ASTM Data
UL 94 Flame rating	V-0	-	UL 94
DTUL @ 264 psi	285	°C	ASTM D 648
Melting Temperature	306	°C	ASTM D 3418
Glass Transition Temperature	125	°C	ASTM E 1356

Electrical properties	Value	Unit	Test Standard
ISO Data
Electric strength	30	kV/mm	IEC 60243-1
ASTM Data
Dielectric Strength, Short Time	30	kV/mm	ASTM D 149
Volume Resistivity	>1E15	Ohm*cm	ASTM D 257

Other properties	Value	Unit	Test Standard
Water absorption	0.13	%	Sim. to ISO 62
Density	1620	kg/m³	ASTM D 792

Diagrams

Characteristics

Processing

Injection Molding

Delivery form

Pellets

Special Characteristics

Flame retardant, Heat stabilized or stable to heat

Features

Weldable

Regional Availability

North America, Europe, Asia Pacific, South and Central America, Near East/Africa

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.