Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Genestar™ G1300A-M41 - PA9T-GF30 - Kuraray Co., Ltd.

Check here, which other Genestar datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - Mechanical properties - Thermal properties - Other properties - Diagrams

Any use of this information falls under the rules of our disclaimer.

Product Texts

G1300A-M41 (black, natural) is a standard 30% GF reinforced injection molding grade provided as pellets.

The main features are:

• Performance at high temperature
• Low water absorption and retention of its initial properties
• Dimensional stability

This grade is suitable for:

• Gears and bearing retainers
• Parts in harsh chemical and thermal environments

Processing/Physical Characteristics	Value	Unit	Test Standard
ISO Data
Molding shrinkage, parallel	0.3	%	ISO 294-4, 2577
Molding shrinkage, normal	0.9	%	ISO 294-4, 2577

Mechanical properties	Value	Unit	Test Standard
ISO Data
Tensile Modulus	9740	MPa	ISO 527
Stress at break	190	MPa	ISO 527
Strain at break	2.5	%	ISO 527
Charpy notched impact strength, +23°C	10	kJ/m²	ISO 179/1eA

Thermal properties	Value	Unit	Test Standard
ISO Data
Melting temperature, 10°C/min	300	°C	ISO 11357-1/-3
Glass transition temperature, 10°C/min	125	°C	ISO 11357-1/-2
Temp. of deflection under load, 1.80 MPa	270	°C	ISO 75-1/-2
ASTM Data
Coefficient of Thermal Expansion, MD	24	E-6/K	ASTM D 696
Coefficient of Thermal Expansion, TD	41	E-6/K	ASTM D 696

Other properties	Value	Unit	Test Standard
Water absorption	0.19	%	Sim. to ISO 62
Density	1370	kg/m³	ISO 1183

Diagrams

Characteristics

Processing

Injection Molding

Delivery form

Black, Natural Color

Additives

Release agent

Special Characteristics

Heat stabilized or stable to heat

Features

Barrier Properties, Creep Resistance, Fatigue Resistance, High Crystallinity, Thermal Stability, Weldable

Chemical Resistance

Acid Resistance, Alkali Resistance, General Chemical Resistance, Environmental Stress Crack Resistance, Solvent Resistance, Grease Resistance, Hydrolytically Stable, Oil Resistance

Applications

Automotive, General Purpose

Regional Availability

North America, Europe, Asia Pacific, South and Central America, Near East/Africa

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.