Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ecopond Flex-262 - (TPC+PLA) - Kingfa Sci. & Tech.

Material Data Center offers the following functions for Ecopond Flex-262:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Ecopond datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Optical properties - Other properties - Film Properties
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt flow index, MFI 2.4 g/10min ISO 1133
Temperature 190 °C -
Load 2.16 kg -
ASTM Data
Melt Flow Index, MFI 12 g/10min ASTM D 1238
Temperature 200 °C -
Load 2.16 kg -
Mold Shrinkage, MD 0.005 mm/mm ASTM D 955
Mechanical propertiesValueUnitTest Standard
ASTM Data
Tensile Strength 19.5 MPa ASTM D 638
Flexural Modulus 245 MPa ASTM D 790
Flexural Strength 9.5 MPa ASTM D 790
Thermal propertiesValueUnitTest Standard
ISO Data
Vicat softening temperature, A 70 °C ISO 306
ASTM Data
DTUL @ 264 psi 50 °C ASTM D 648
Melting Temperature 133 °C ASTM D 3418
Optical propertiesValueUnitTest Standard
ASTM Data
Light Transmittance 86 % ASTM D 1003
Other propertiesValueUnitTest Standard
Density 1230 kg/m³ ISO 1183
Density 1240 kg/m³ ASTM D 792
Film PropertiesValueUnitTest Standard
ISO Data
Maximum stress, parallel 37 MPa ISO 527-3
Maximum stress, normal 43 MPa ISO 527-3
Maximum strain, parallel 480 % ISO 527-3
Maximum strain, normal 640 % ISO 527-3
Characteristics
Processing
Blown Film Extrusion, Casting
Features
Weldable
Certifications
Biodegradable
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.