Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Diran™ 410MF07 - PA*-MX7 - Stratasys Ltd.

Material Data Center offers the following functions for Diran™ 410MF07:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Diran datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Thermal properties - Electrical properties - Other properties - 3D Data
Any use of this information falls under the rules of our disclaimer.
Thermal propertiesValueUnitTest Standard
ASTM Data
DTUL @ 66 psi 90 °C ASTM D 648
DTUL @ 264 psi 70 °C ASTM D 648
Other Standards[S]
Glass Transition Temperature 117 °C ASTM D 7426
S: These properties are reported by the producer according standards that are different to our defaults.
Electrical propertiesValueUnitTest Standard
ASTM Data
Volume Resistivity 1.5E15 Ohm*cm ASTM D 257
Other propertiesValueUnitTest Standard
Density 1160 kg/m³ ASTM D 792
3D DataValueUnitTest Standard
Tensile modulus, on-edge 1690[1] MPa -
Tensile modulus, upright 1460[2] MPa -
Stress at break, on-edge 40[1] MPa -
Stress at break, upright 30[2] MPa -
Strain at break, on-edge 12[1] % -
Strain at break, upright 3.1[2] % -
Flexural modulus, on-edge 1850[3] MPa -
Flexural modulus, upright 1470[4] MPa -
1: XZ-direction; reference to ASTM D638   2: ZX-direction; reference to ASTM D638   3: XZ-direction; reference to ASTM D790  4: ZX-direction; reference to ASTM D790
Characteristics
Processing
Additive Manufacturing
Delivery form
Monofilament
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.