Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of CYCOLOY™ FR Resin RCM6123 - (PC+ABS) - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for CYCOLOY™ FR Resin RCM6123:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Cycoloy datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Electrical properties - Other properties - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Product Texts
CYCOLOY RCM6123 resin is based on Polycarbonate + ABS (PC+ABS) blend containing mineral and is non-brominated and non-chlorinated flame retardant. It contains 30% post-consumer recycle content with a UL-94 V0 rating @ 1.2mm. This grade is suitable for thin wall applications that require high flow and high stiffness performance.

UL Yellow Card Link: E207780-100634986
Processing/Physical CharacteristicsValueUnitTest Standard
ASTM Data
Melt Flow Index, MFI 11 g/10min ASTM D 1238
Temperature 260 °C -
Load 2.16 kg -
Mold Shrinkage, MD 0.0035 mm/mm ASTM D 955
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 4500 MPa ISO 527
Yield stress 55 MPa ISO 527
Yield strain 3.8 % ISO 527
Stress at break 35 MPa ISO 527
Strain at break 30 % ISO 527
Flexural modulus, 23°C 4400 MPa ISO 178
Charpy notched impact strength, +23°C, 3mm 5 kJ/m² ISO 179/1eA
Izod notched impact strength, +23°C 5 kJ/m² ISO 180/1A
ASTM Data
Tensile Modulus 4400 MPa ASTM D 638
Tensile Strength at Yield 50 MPa ASTM D 638
Tensile Strength at Break 40 MPa ASTM D 638
Elongation at Yield 3.3 % ASTM D 638
Elongation at Break 26 % ASTM D 638
Flexural Modulus 4300 MPa ASTM D 790
Izod Impact notched, 1/8 in 60 J/m ASTM D 256
Thermal propertiesValueUnitTest Standard
ISO Data
Temp. of deflection under load, 1.80 MPa 85 °C ISO 75-1/-2
Coeff. of linear therm. expansion, parallel 62 E-6/K ISO 11359-1/-2
Coeff. of linear therm. expansion, normal 78 E-6/K ISO 11359-1/-2
Burning behav. at thickness h V-0 class IEC 60695-11-10
Thickness tested 1.2 mm -
Yellow Card available yes - -
ASTM Data
Coefficient of Thermal Expansion, MD 42 E-6/K ASTM D 696
Coefficient of Thermal Expansion, TD 49 E-6/K ASTM D 696
DTUL @ 66 psi 91 °C ASTM D 648
DTUL @ 264 psi 82 °C ASTM D 648
Electrical propertiesValueUnitTest Standard
ISO Data
Comparative tracking index 325 - IEC 60112
Other propertiesValueUnitTest Standard
Humidity absorption 0.04 % Sim. to ISO 62
Density 1300 kg/m³ ISO 1183
Density 1300 kg/m³ ASTM D 792
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 80 - 90 °C -
Pre-drying - Time 3 - 4 h -
Processing humidity ≤0.04 % -
Melt temperature 245 - 275 °C -
Mold temperature 60 - 80 °C -
Zone 1 220 - 255 °C -
Zone 2 220 - 265 °C -
Zone 3 245 - 275 °C -
Nozzle temperature 245 - 275 °C -
Screw speed 40 - 70 rpm -
Back pressure 0.3 - 0.7 MPa -
Characteristics
Processing
Injection Molding
Special Characteristics
Flame retardant, Halogen-free
Certifications
Recycled Resin Content
Applications
Electrical and Electronical
Regional Availability
North America, Europe, Asia Pacific
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.