Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of CYCOLOY™ FR Resin CX7510 - Asia - (PC+ABS) - Saudi Basic Industries Corporation (SABIC)

Check here, which other Cycoloy datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - Mechanical properties - Thermal properties - Other properties - Processing Recommendation Injection Molding - Diagrams

Any use of this information falls under the rules of our disclaimer.

Product Texts

CYCOLOY CX7510 Polycarbonate/Acrylonitrile Butadiene Styrene (PC/ABS) blend is an injection moldable, high flow, high heat resistant, non chlorinated/brominated flame retardant grade. It has a UL94 V0@1.5mm and 5VB@1.5mm flame rating. This grade has improved chemical resistance compared to standard PC/ABS blends and is a good candidate for thin wall applications.

UL Yellow Card Link E207780-570688

Processing/Physical Characteristics	Value	Unit	Test Standard
ISO Data
Melt volume-flow rate, MVR	41	cm³/10min	ISO 1133
Temperature	260	°C	-
Load	5	kg	-
Density of melt	1050	kg/m³	-
Thermal conductivity of melt	0.2	W/(m K)	-
Spec. heat capacity of melt	2100	J/(kg K)	-
Ejection temperature	106	°C	-
ASTM Data
Melt Flow Index, MFI	45	g/10min	ASTM D 1238
Temperature	260	°C	-
Load	5	kg	-

Mechanical properties	Value	Unit	Test Standard
ISO Data
Tensile Modulus	2540	MPa	ISO 527
Yield stress	64	MPa	ISO 527
Yield strain	4.5	%	ISO 527
Stress at break	48	MPa	ISO 527
Strain at break	36	%	ISO 527
Flexural modulus	2620	MPa	ISO 178
Charpy notched impact strength, +23°C	36	kJ/m²	ISO 179/1eA
ASTM Data
Tensile Modulus	2580	MPa	ASTM D 638
Tensile Strength at Yield	65	MPa	ASTM D 638
Tensile Strength at Break	49	MPa	ASTM D 638
Elongation at Yield	4	%	ASTM D 638
Elongation at Break	36	%	ASTM D 638
Flexural Modulus	2330	MPa	ASTM D 790
Izod Impact notched, 1/8 in	640	J/m	ASTM D 256
Izod Impact notched, Low-Temperature	137	J/m	ASTM D 256
Temperature	-30	°C	-

Thermal properties	Value	Unit	Test Standard
ISO Data
Temp. of deflection under load, 1.80 MPa	95	°C	ISO 75-1/-2
Vicat softening temperature, B	115	°C	ISO 306
Vicat softening temperature, 120°C/h 50N	118	°C	ISO 306
Coeff. of linear therm. expansion, parallel	102	E-6/K	ISO 11359-1/-2
Coeff. of linear therm. expansion, normal	105	E-6/K	ISO 11359-1/-2
Burning behav. at 1.5 mm nom. thickn.	V-0	class	IEC 60695-11-10
Thickness tested	1.5	mm	-
Burning behav. 5V at thickness h	5VB	class	IEC 60695-11-20
Thickness tested	1.5	mm	-
ASTM Data
Vicat Temperature	113	°C	ASTM D 1525

Other properties	Value	Unit	Test Standard
Water absorption	0.11	%	Sim. to ISO 62
Humidity absorption	0.05	%	Sim. to ISO 62
Density	1180	kg/m³	ISO 1183
Density	1180	kg/m³	ASTM D 792

Processing Recommendation Injection Molding	Value	Unit	Test Standard
Pre-drying - Temperature	90 - 100	°C	-
Pre-drying - Time	2 - 4	h	-
Processing humidity	≤0.04	%	-
Melt temperature	270 - 300	°C	-
Mold temperature	60 - 90	°C	-
Zone 1	260 - 300	°C	-
Zone 2	260 - 300	°C	-
Zone 3	265 - 300	°C	-
Screw speed	40 - 70	rpm	-
Back pressure	0.3 - 0.7	MPa	-

Diagrams

Characteristics

Processing

Injection Molding

Additives

Flame retarding agent

Special Characteristics

Flame retardant

Chemical Resistance

General Chemical Resistance

Regional Availability

Asia Pacific

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.