Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Cristal™ Renew EB062-50 - Copolyester - Eastman Chemical Co.

Material Data Center offers the following functions for Cristal™ Renew EB062-50:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Cristal datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Optical properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Product Texts

Eastman Cristal™ Renew EB062-50 copolyester is a resin specifically developed for extrusion blown bottles where

aesthetics such as high clarity and gloss, coupled with design flexibility, drive demand particularly in packaging for

cosmetics and personal care. Compared to commonly used materials, Cristal™ Renew EB062-50 runs on most

standard processing equipment. Extremely high melt strength makes the resin an excellent choice when

manufacturing bottles. This product offers improved toughness, melt strength, chemical resistance, excellent

color, and clarity in thick-walled applications.

Eastman Renew polymers have been certified by International Sustainability & Carbon Certification (ISCC), a

global, independent agency for tracking sustainable content in a variety of industries. Renew polymers are

produced with ISCC certified circular content by mass balance allocation.

Processing/Physical CharacteristicsValueUnitTest Standard
ASTM Data
Mold Shrinkage, MD 0.003 mm/mm ASTM D 955
Mechanical propertiesValueUnitTest Standard
ASTM Data
Tensile Modulus 1900 MPa ASTM D 638
Tensile Strength at Yield 47 MPa ASTM D 638
Tensile Strength at Break 48 MPa ASTM D 638
Elongation at Yield 5 % ASTM D 638
Elongation at Break 300 % ASTM D 638
Flexural Modulus 1900 MPa ASTM D 790
Rockwell Hardness R 105 - ASTM D 785
Izod Impact notched, 1/8 in N J/m ASTM D 256
Izod Impact notched, Low-Temperature 63 J/m ASTM D 256
Temperature -40 °C -
Izod Impact unnotched, 1/8 in N J/m ASTM D 256
Thermal propertiesValueUnitTest Standard
ASTM Data
DTUL @ 66 psi 73 °C ASTM D 648
DTUL @ 264 psi 63 °C ASTM D 648
Vicat Temperature 85 °C ASTM D 1525
Optical propertiesValueUnitTest Standard
ASTM Data
Gloss 143 - ASTM D 2457
Haze 1.3 % ASTM D 1003
Light Transmittance 91 % ASTM D 1003
Other propertiesValueUnitTest Standard
Density 1250 kg/m³ ASTM D 792
Color L 95 - CIE
Color a -0.2 - CIE
Color b 0.6 - CIE
Characteristics
Processing
Other Extrusion, Blow Molding
Special Characteristics
High impact or impact modified, Transparent
Features
Barrier Properties, High Gloss, Low Emission, Melt Strength, Copolymer
Chemical Resistance
General Chemical Resistance
Certifications
ISCC Plus
Applications
Packaging
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.