Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Bormed™ HG820MO - PP - Borealis A/S

Material Data Center offers the following functions for Bormed™ HG820MO:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Bormed datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt flow index, MFI 28 g/10min ISO 1133
Temperature 230 °C -
Load 2.16 kg -
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 1900 MPa ISO 527
Yield stress 40 MPa ISO 527
Yield strain 7 % ISO 527
Flexural modulus, 23°C 1800 MPa ISO 178
Charpy notched impact strength, +23°C 2 kJ/m² ISO 179/1eA
Thermal propertiesValueUnitTest Standard
ISO Data
Melting temperature, 10°C/min 162 °C ISO 11357-1/-3
Temp. of deflection under load, 0.45 MPa 100 °C ISO 75-1/-2
Processing Recommendation Injection MoldingValueUnitTest Standard
Melt temperature 210 - 260 °C -
Mold temperature 30 - 40 °C -
Holding pressure 20 - 50 MPa -
Characteristics
Processing
Injection Molding
Special Characteristics
Transparent, Sterilizable, Ethylene Oxide (EtO) Sterilization, Steam sterilization
Features
Low Warpage, Homopolymer
Chemical Resistance
Oxidation Resistance
Certifications
Food contact, Food approval FDA 21 CFR, Medical Grade, US Pharmacopeia Class VI Approved, Device Master File
Applications
Medical, Packaging
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.