Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Biomer® P226 - PHB - Biomer

Material Data Center offers the following functions for Biomer® P226:
unit conversion, PDF datasheet print, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Biomer datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Other properties - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt volume-flow rate, MVR 9.5 cm³/10min ISO 1133
Temperature 180 °C -
Load 5 kg -
Melt flow index, MFI 10 g/10min ISO 1133
Temperature 180 °C -
Load 5 kg -
Molding shrinkage, parallel 1.2 % ISO 294-4, 2577
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 1520 MPa ISO 527
Tensile Strength 25.5 MPa ISO 527
Charpy impact strength, +23°C N kJ/m² ISO 179/1eU
Charpy impact strength, -30°C 30 kJ/m² ISO 179/1eU
Charpy notched impact strength, +23°C 2.7 kJ/m² ISO 179/1eA
Charpy notched impact strength, -30°C 1.4 kJ/m² ISO 179/1eA
Shore D hardness 67 - ISO 7619-1
Thermal propertiesValueUnitTest Standard
ISO Data
Temp. of deflection under load, 1.80 MPa 59 °C ISO 75-1/-2
Vicat softening temperature, A 147 °C ISO 306
Other propertiesValueUnitTest Standard
Humidity absorption 0.4 % Sim. to ISO 62
Density 1250 kg/m³ ISO 1183
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 60 °C -
Pre-drying - Time 2 h -
Mold temperature 30 - 55 °C -
Characteristics
Processing
Injection Molding, Other Extrusion
Delivery form
Pellets
Features
High Crystallinity
Certifications
Contains renewable resources, Biodegradable
Regional Availability
Europe
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.