Alle Werkstoffdatenblätter sind frei verfügbar. Kostenlose Registrierung unter www.materialdatacenter.com
Material Data Center ist ein weltweit führendes Informationssystem für Kunststoffe und bietet eine umfangreiche Kunststoffdatenbank, Berechnungsprogramme, CAE Schnittstellen, eine Literaturdatenbank und eine Bauteildatenbank. Für mehr Informationen über Material Data Center besuchen Sie www.materialdatacenter.com.
Dies ist das kostenlose Material Data Center Datenblatt für Sarlink® 5740DB - TPV - Teknor Apex Co.
Einheitenkonvertierung, PDF Datenblattdruck, direkter Vergleich mit anderen Kunststoffen
Hier finden Sie eine Übersicht über weitere Informationen, die Material Data Center zu Sarlink bietet.
The Sarlink TPV 5700B series are highly engineered extrusion-grade thermoplastic vulcanizates with outstanding UV stability designed for demanding automotive interior and exterior sealing applications, including glass run channels, waistbelts, weather strips, seals and other profiles. Sarlink TPV X5740DB is a high hardness, medium density, high performance grade with low fogging and excellent color retention and elastic properties.
Property | Value | Unit | Standard |
---|---|---|---|
Tensile properties (Cross Flow Direction) | ISO 37 | ||
Tensile strength at break | 19 | MPa | |
Modulus at 100% elongation | 9 | MPa | |
Elongation at break | 640 | % | |
Hot air aging (168h/150°C, Cross Flow Direction) | ISO 188 | ||
Change in hardness | 3 | points | |
Change in tensile strength at break | -22 | % | |
Change in modulus at 100% elongation | 5 | % | |
Change in elongation at break | -25 | % | |
Hot air aging (1000h/135°C, Cross Flow Direction) | ISO 188 | ||
Change in hardness | 3 | points | |
Change in tensile strength at break | -20 | % | |
Change in modulus at 100% elongation | 9 | % | |
Change in elongation at break | -25 | % | |
Volume swell (70h/125°C in IRM 903 oil) | 47 | % | ISO 1817 |
Apparent shear viscosity @ 206 1/s, 200°C | 400 | Pa.s | ISO 11443 Capillary |
Mechanische Eigenschaften | Wert | Einheit | Prüfnorm | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISO Daten | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Druckverformungsrest bei 23 °C, 24h | 46 | % | ISO 815 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Druckverformungsrest bei 70 °C, 24h | 58 | % | ISO 815 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Shorehärte D | 40 | - | ISO 7619-1 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Sonstige Normen[S] | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Spannung bei 100% Dehnung | 13.3 | MPa | ISO 37 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Bruchspannung TPE | 18 | MPa | ISO 37 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Bruchdehnung TPE | 490 | % | ISO 37 |
S: | Diese Eigenschaften wurden vom Hersteller nach Normen gemessen, die von unseren Vorgaben abweichen. |
Andere Eigenschaften | Wert | Einheit | Prüfnorm |
Dichte | 960 | kg/m³ | ISO 1183 |
Material Data Center wird von M-Base Engineering + Software GmbH angeboten. M-Base Engineering + Software GmbH übernimmt keinerlei Gewährleistung, dass das System fehlerfrei ist. Jegliche Entscheidung über die Anwendung von Werkstoffen muss mit dem jeweiligen Produzenten einzeln abgeklärt werden.
Weiterführende Informationen zu diesem Material wie Stoffgruppe, Herstelleradresse, evtl. auch Datenblätter und Anwendungsbeispiele finden Sie auf www.materialdatacenter.com. Ein Teil der Informationen sind registrierten Nutzern vorbehalten. Auf der Startseite finden Sie einen Link zur kostenlosen Registrierung.