Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.
This is the free Material Data Center Datasheet of Zeonex® K26R - COP - Zeon Corporation
unit conversion, PDF datasheet print, comparison with other plastics
Check here, which other Zeonex datasheets, application examples or technical articles are available in Material Data Center
加工/物理特性 | 价值 | 单位 | Test Standard | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ASTM数据 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
熔融指数, MFI | 55 | g/10min | ASTM D 1238 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
温度 | 280 | °C | - | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
负载 | 2.16 | kg | - |
机械性能 | 价值 | 单位 | Test Standard | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ASTM数据 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
弯曲模量 | 2400 | MPa | ASTM D 790 |
热性能 | 价值 | 单位 | Test Standard | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ASTM数据 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
玻璃化转变温度 | 143 | °C | ASTM E 1356 |
光学特性 | 价值 | 单位 | Test Standard | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ASTM数据 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
光透射率 | 92 | % | ASTM D 1003 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
折射率 | 1.53 | - | ASTM D 542 |
其它性能 | 价值 | 单位 | Test Standard |
密度 | 1010 | kg/m³ | ASTM D 792 |
加工推荐(注塑) | 价值 | 单位 | Test Standard |
预干燥-温度 | 105 | °C | - |
预干燥-时间 | 4 - 12 | h | - |
注塑熔体温度 | 280 - 300 | °C | - |
模具温度 | 95 - 140 | °C | - |
加料温度 | 240 - 260 | °C | - |
1区 | 265 - 285 | °C | - |
2区 | 280 - 300 | °C | - |
喷嘴温度 | 270 - 290 | °C | - |
螺杆转速 | 20 - 80 | rpm | - |
背压 | 5 - 10 | MPa | - |
Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.
Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.