Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultraform® N2320 003 UN Q600 - POM - BASF

Material Data Center offers the following functions for Ultraform® N2320 003 UN Q600:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, parameters for material models, CAE Interfaces

Check here, which other Ultraform datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
材料文字说明
快速固化标准注塑等级。 含脱模剂。

根据ISO 1043-1: POM的缩写名称
根据ISO 29988-POM-K,,M-GNR,3-2的名称
加工/物理特性价值单位Test Standard
ISO数据
熔体体积流动速度, MVR 7.5 cm³/10min ISO 1133
温度 190 °C -
载荷 2.16 kg -
模塑收缩率, 平行 2.1 % ISO 294-4, 2577
模塑收缩率, 垂直 2.1 % ISO 294-4, 2577
机械性能价值单位Test Standard
ISO数据
拉伸模量 2600 MPa ISO 527
屈服应力 63 MPa ISO 527
屈服伸长率 10 % ISO 527
名义断裂伸长率 35 % ISO 527
拉伸蠕变模量, 1h 2000 MPa ISO 899-1
拉伸蠕变模量, 1000h 1400 MPa ISO 899-1
无缺口简支梁冲击强度, +23°C 220 kJ/m² ISO 179/1eU
简支梁冲击强度, -30°C 190 kJ/m² ISO 179/1eU
简支梁缺口冲击强度, +23°C 6 kJ/m² ISO 179/1eA
简支梁缺口冲击强度, -30°C 4 kJ/m² ISO 179/1eA
热性能价值单位Test Standard
ISO数据
熔融温度, 10°C/min 166 °C ISO 11357-1/-3
热变形温度, 1.80 MPa 95 °C ISO 75-1/-2
热变形温度, 0.45 MPa 154 °C ISO 75-1/-2
线性热膨胀系数, 平行 110 E-6/K ISO 11359-1/-2
1.5mm名义厚度时的燃烧性 HB class IEC 60695-11-10
测试用试样的厚度 1.6 mm -
Yellow Card 现存 是的 - -
厚度为h时的燃烧性 HB class IEC 60695-11-10
Yellow Card 现存 是的 - -
电性能价值单位Test Standard
ISO数据
相对介电常数., 100Hz 3.8 - IEC 62631-2-1
相对介电常数., 1MHz 3.8 - IEC 62631-2-1
介质损耗因子, 100Hz 10 E-4 IEC 62631-2-1
介质损耗因子, 1MHz 65 E-4 IEC 62631-2-1
体积电阻率 1E12 Ohm*m IEC 62631-3-1
表面电阻率 1E15 Ohm IEC 62631-3-2
介电强度 40 kV/mm IEC 60243-1
相对漏电起痕指数 600 - IEC 60112
其它性能价值单位Test Standard
吸水性 0.8 % 类似ISO 62
吸湿性 0.2 % 类似ISO 62
密度 1410 kg/m³ ISO 1183
函数
粘度-剪切速度 , Ultraform® N2320 003 UN Q600, POM, BASF
剪切应力-剪切速度 , Ultraform® N2320 003 UN Q600, POM, BASF
动态剪切模量-温度 , Ultraform® N2320 003 UN Q600, POM, BASF
应力-应变.  , Ultraform® N2320 003 UN Q600, POM, BASF
正割模量-应变.  , Ultraform® N2320 003 UN Q600, POM, BASF
应力-应变(等时的) 23°C, Ultraform® N2320 003 UN Q600, POM, BASF
蠕变模量-时间. 23°C, Ultraform® N2320 003 UN Q600, POM, BASF
蠕变曲线 23°C, Ultraform® N2320 003 UN Q600, POM, BASF
应力-应变(等时的) 40°C, Ultraform® N2320 003 UN Q600, POM, BASF
蠕变模量-时间. 40°C, Ultraform® N2320 003 UN Q600, POM, BASF
蠕变曲线 40°C, Ultraform® N2320 003 UN Q600, POM, BASF
应力-应变(等时的) 80°C, Ultraform® N2320 003 UN Q600, POM, BASF
蠕变模量-时间. 80°C, Ultraform® N2320 003 UN Q600, POM, BASF
蠕变曲线 80°C, Ultraform® N2320 003 UN Q600, POM, BASF
比容-温度(pvT) , Ultraform® N2320 003 UN Q600, POM, BASF
拉伸模量-温度 , Ultraform® N2320 003 UN Q600, POM, BASF
典型数据
加工方法
注塑
供货形式
粒料
添加剂
脱模助剂
地区供应
其他信息
注塑成型
PREPROCESSING
Pre/Post-processing, max. allowed water content: .2 %
Pre/Post-processing, Pre-drying, Temperature: 100 °C
Pre/Post-processing, Pre-drying, Time: 3 h

PROCESSING
injection molding, Melt temperature, range: 190 - 230 °C
injection molding, Melt temperature, recommended: 200 °C
injection molding, Mold temperature, range: 60 - 120 °C
injection molding, Mold temperature, recommended: 90 °C
injection molding, Dwell time, thermoplastics: 10 min
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.