Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ULTEM™ Resin HU1004 - Asia - PEI - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for ULTEM™ Resin HU1004 - Asia:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Ultem datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 其它性能 - 加工推荐（注塑）
Any use of this information falls under the rules of our disclaimer.
材料文字说明
High Temperature, Transparent, Polyetherimide Blend with Improved Ductility and Enhanced Hydrostability. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO 10993 or USP Class VI); food contact compliant; Steam, Gamma, EtO, and E-beam sterilizable.

UL Yellow Card Link E121562-100737020
加工/物理特性价值单位Test Standard
ISO数据
熔体体积流动速度, MVR 14 cm³/10min ISO 1133
温度 360 °C -
载荷 5 kg -
ASTM数据
熔融指数, MFI 10 g/10min ASTM D 1238
温度 337 °C -
负载 6.6 kg -
机械性能价值单位Test Standard
ISO数据
屈服应力 97 MPa ISO 527
屈服伸长率 7 % ISO 527
断裂应力 80 MPa ISO 527
断裂伸长率 50 % ISO 527
弯曲模量 2800 MPa ISO 178
Izod impact strength, +23°C, 4mm N kJ/m² ISO 180/1U
Izod impact strength, -30°C, 4mm N kJ/m² ISO 180/1U
悬臂梁缺口冲击强度, +23°C, 4mm 6 kJ/m² ISO 180/1A
悬臂梁缺口冲击强度, -30°C, 4mm 6 kJ/m² ISO 180/1A
ASTM数据
拉伸模量 2900 MPa ASTM D 638
屈服应力 95 MPa ASTM D 638
断裂拉伸强度 90 MPa ASTM D 638
屈服伸长率 7 % ASTM D 638
断裂伸长率 85 % ASTM D 638
弯曲模量 3000 MPa ASTM D 790
悬臂梁缺口冲击强度, 1/8 in 70 J/m ASTM D 256
热性能价值单位Test Standard
ISO数据
维卡软化温度, A 219 °C ISO 306
维卡软化温度, B 212 °C ISO 306
维卡软化温度, 120°C/h 50N 212 °C ISO 306
厚度为h时的燃烧性 V-0 class IEC 60695-11-10
测试用试样的厚度 0.8 mm -
ASTM数据
热导率, 固态 0.0274 W/(m K) ASTM C 177
其它性能价值单位Test Standard
密度 1280 kg/m³ ISO 1183
密度 1280 kg/m³ ASTM D 792
加工推荐（注塑）价值单位Test Standard
预干燥-温度 150 °C -
预干燥-时间 6 - 8 h -
加工湿度 ≤0.02 % -
注塑熔体温度 355 - 390 °C -
模具温度 130 - 160 °C -
1区 330 - 390 °C -
2区 335 - 390 °C -
3区 345 - 390 °C -
螺杆转速 40 - 70 rpm -
背压 0.3 - 0.7 MPa -
典型数据
加工方法
注塑
特殊性能
透明., 环氧乙烷灭菌(EtO), 蒸汽灭菌, Gamma irradiation sterilization, Electron beam (e-beam) sterilization
Certifications
可食品接触的, FDA 21 CFR认证, US药物六级认证
应用
药物
地区供应
亚太
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.