Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Terlux® HD 2822 - MABS - INEOS Styrolution

Check here, which other Terlux datasheets, application examples or technical articles are available in Material Data Center

加工/物理特性 - 机械性能 - 热性能 - 电性能 - 其它性能 - 试样制备条件 - 函数

Any use of this information falls under the rules of our disclaimer.

材料文字说明

Terlux® HD 2822 is a new standard-injection molding grade based on a MABS polymer. Terlux® HD 2822 offers a well balanced combination of stiffness and toughness and the high transparency well known in SAN molding compositions.

加工/物理特性	价值	单位	Test Standard
ISO数据
熔体体积流动速度, MVR	2	cm³/10min	ISO 1133
温度	220	°C	-
载荷	10	kg	-
喷射温度	90	°C	-

机械性能	价值	单位	Test Standard
ISO数据
拉伸模量	2000	MPa	ISO 527
屈服应力	48	MPa	ISO 527
屈服伸长率	4	%	ISO 527
名义断裂伸长率	12	%	ISO 527
拉伸蠕变模量, 1000h	1250	MPa	ISO 899-1
无缺口简支梁冲击强度, +23°C	120	kJ/m²	ISO 179/1eU
简支梁冲击强度, -30°C	80	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度, +23°C	5	kJ/m²	ISO 179/1eA
简支梁缺口冲击强度, -30°C	2	kJ/m²	ISO 179/1eA

热性能	价值	单位	Test Standard
ISO数据
玻璃化转变温度, 10°C/min	107	°C	ISO 11357-1/-2
热变形温度, 1.80 MPa	90	°C	ISO 75-1/-2
热变形温度, 0.45 MPa	94	°C	ISO 75-1/-2
维卡软化温度, B	93	°C	ISO 306
线性热膨胀系数, 平行	95	E-6/K	ISO 11359-1/-2

电性能	价值	单位	Test Standard
ISO数据
相对介电常数., 100Hz	2.9	-	IEC 62631-2-1
相对介电常数., 1MHz	2.8	-	IEC 62631-2-1
介质损耗因子, 100Hz	160	E-4	IEC 62631-2-1
介质损耗因子, 1MHz	140	E-4	IEC 62631-2-1
体积电阻率	1E13	Ohm*m	IEC 62631-3-1
表面电阻率	1E15	Ohm	IEC 62631-3-2
相对漏电起痕指数	600	-	IEC 60112

其它性能	价值	单位	Test Standard
吸水性	0.7	%	类似ISO 62
吸湿性	0.35	%	类似ISO 62
密度	1080	kg/m³	ISO 1183

试样制备条件	价值	单位	Test Standard
ISO数据
注塑, 熔体温度	250	°C	ISO 294
注塑, 模具温度	60	°C	ISO 294
注塑, 注射速度	200	mm/s	ISO 294

函数

典型数据

加工方法

注塑, 薄膜挤出成型, 异型材挤出成型, 片材挤出成型, 吹塑, 热成型

供货形式

粒料

特殊性能

透明., 消毒, 环氧乙烷灭菌(EtO), Gamma irradiation sterilization

耐化学试剂

抗辐射性

Certifications

可食品接触的, 10/2011认证, FDA 21 CFR认证, 医用级, Biocompatibility ISO 10993, US药物六级认证, Drug Master File, Long term supply assurance

应用

药物

地区供应

北美, 欧洲, 亚太, 中南美洲, 中东/非洲

其他信息

注塑成型

PREPROCESSING
Pre/Post-processing, Pre-drying, Temperature: 70 °C
Pre/Post-processing, Pre-drying, Time: 2 h

PROCESSING
injection molding, Melt temperature, range: 230 - 260 °C
injection molding, Melt temperature, recommended: 245 °C
injection molding, Mold temperature, range: 50 - 80 °C
injection molding, Mold temperature, recommended: 65 °C

耐化学性

酸类
	硝酸 (40g/100g) (23°C)
醇类
	异丙醇 (23°C)
碳氢化合物
	正乙烷 (23°C)
	甲苯 (23°C)
酮类
	丙酮 (23°C)
醚类
	(二)乙醚 (23°C)
其它
	乙酸乙酯 (23°C)

权利义务的法律声明

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.