Any use of this information falls under the rules of our
disclaimer.
加工/物理特性 | 价值 | 单位 | Test Standard |
ISO数据 |
熔体体积流动速度, MVR |
27 |
cm³/10min |
ISO 1133 |
温度 |
300 |
°C |
- |
载荷 |
1.2 |
kg |
- |
模塑收缩率, 平行 |
0.6 |
% |
ISO 294-4, 2577 |
模塑收缩率, 垂直 |
0.6 |
% |
ISO 294-4, 2577 |
机械性能 | 价值 | 单位 | Test Standard |
ISO数据 |
屈服应力 |
65 |
MPa |
ISO 527 |
名义断裂伸长率 |
95 |
% |
ISO 527 |
弯曲模量, 23°C |
2300 |
MPa |
ISO 178 |
弯曲强度 |
90 |
MPa |
ISO 178 |
简支梁缺口冲击强度, +23°C |
40 |
kJ/m² |
ISO 179/1eA |
洛克硬度 |
R 120 |
- |
ISO 2039-2 |
热性能 | 价值 | 单位 | Test Standard |
ISO数据 |
热变形温度, 1.80 MPa |
128 |
°C |
ISO 75-1/-2 |
线性热膨胀系数, 平行 |
65 |
E-6/K |
ISO 11359-1/-2 |
厚度为h时的燃烧性 |
V-2 |
class |
IEC 60695-11-10 |
测试用试样的厚度 |
0.4 |
mm |
- |
电性能 | 价值 | 单位 | Test Standard |
ISO数据 |
相对漏电起痕指数 |
325 |
- |
IEC 60112 |
光学特性 | 价值 | 单位 | Test Standard |
ISO Data |
透光率 |
90[1] |
% |
ISO 13468-1, -2 |
ASTM数据 |
折射率 |
1.58 |
- |
ASTM D 542 |
其它性能 | 价值 | 单位 | Test Standard |
密度 |
1200 |
kg/m³ |
ISO 1183 |
加工推荐(注塑) | 价值 | 单位 | Test Standard |
预干燥-温度 |
120 |
°C |
- |
预干燥-时间 |
5 - 8 |
h |
- |
模具温度 |
80 - 120 |
°C |
- |
1区 |
260 - 300 |
°C |
- |
典型数据
加工方法
注塑
特殊性能
经耐紫外线处理的/耐气候的, 经热稳处理的/耐热的, 透明.
耐化学试剂
水解稳定
应用
电子电气
地区供应
北美, 欧洲, 亚太
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com