Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Luminy® LX175U - PLA - TotalEnergies Corbion

Material Data Center offers the following functions for Luminy® LX175U:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Luminy datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
加工/物理特性价值单位Test Standard
ISO数据
熔融指数, MFI 3 g/10min ISO 1133
温度 190 °C -
负载 2.16 kg -
机械性能价值单位Test Standard
ISO数据
拉伸模量 3500 MPa ISO 527
拉伸强度 45 MPa ISO 527
断裂伸长率 5 % ISO 527
简支梁缺口冲击强度, +23°C 5 kJ/m² ISO 179/1eA
热性能价值单位Test Standard
ISO数据
熔融温度, 10°C/min 152 °C ISO 11357-1/-3
玻璃化转变温度, 10°C/min 57 °C ISO 11357-1/-2
热变形温度, 0.45 MPa 57 °C ISO 75-1/-2
其它性能价值单位Test Standard
密度 1240 kg/m³ ISO 1183
Moisture Content 0.04 % -
加工推荐(挤出)价值单位Test Standard
预干燥-温度 85 °C -
预干燥-时间 4 - 6 h -
注塑熔体温度 170 - 190 °C -
加料温度 20 - 40 °C -
1区 190 - 210 °C -
喷嘴温度 190 - 210 °C -
典型数据
加工方法
薄膜挤出成型, 热成型
供货形式
粒料
特殊性能
透明.
特征
无定形
Certifications
生物相容, 可食品接触的, 10/2011认证, FDA 21 CFR认证, 可堆肥 ISO 13432 (制造商), 可堆肥 ASTM D6400 (制造商), 可堆肥 ISO 13432 (证书), 可堆肥 ASTM D6400 (证书)
地区供应
北美, 中南美洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.