Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LUMILOY GP2300 - PPO-GF30 - LG Chem

Material Data Center offers the following functions for LUMILOY GP2300:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Lumiloy datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 电性能 - 其它性能 - 加工推荐（注塑）
Any use of this information falls under the rules of our disclaimer.
加工/物理特性价值单位Test Standard
ASTM数据
熔融指数, MFI 9 g/10min ASTM D 1238
温度 280 °C -
负载 5 kg -
模压收缩率, 平行 0.002 mm/mm ASTM D 955
模压收缩率, TD 0.006 mm/mm ASTM D 955
机械性能价值单位Test Standard
ASTM数据
拉伸模量 7800 MPa ASTM D 638
屈服应力 127 MPa ASTM D 638
断裂伸长率 3 % ASTM D 638
弯曲模量 7750 MPa ASTM D 790
弯曲强度 127 MPa ASTM D 790
悬臂梁缺口冲击强度, 1/8 in 128 J/m ASTM D 256
热性能价值单位Test Standard
ASTM数据
UL94 燃烧性 HB - UL 94
测试厚度 0.8 mm -
热释放速率, 平行 17 E-6/K ASTM D 696
热释放速率, 垂直 70 E-6/K ASTM D 696
DTUL @ 264 psi 139 °C ASTM D 648
维卡温度 148 °C ASTM D 1525
电性能价值单位Test Standard
ISO数据
相对漏电起痕指数 137 - IEC 60112
ASTM数据
电介质强度, 短时 36 kV/mm ASTM D 149
体积电阻率 1E11 Ohm*cm ASTM D 257
其它性能价值单位Test Standard
密度 1280 kg/m³ ASTM D 792
加工推荐（注塑）价值单位Test Standard
预干燥-温度 90 - 100 °C -
预干燥-时间 4 - 5 h -
加工湿度 ≤0.02 % -
注塑熔体温度 280 - 320 °C -
模具温度 70 - 110 °C -
1区 260 - 300 °C -
2区 270 - 310 °C -
3区 270 - 310 °C -
喷嘴温度 270 - 310 °C -
典型数据
加工方法
注塑
供货形式
黑色
特殊性能
高冲击韧性的/经抗冲改性的
耐化学试剂
水解稳定
Certifications
可水接触的, NSF认证 61
应用
电子电气, 通用
地区供应
北美, 欧洲, 亚太, 中南美洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.