Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of GLOBIO BIO-PET 056TT - PET - Toyota Tsusho Corporation

Material Data Center offers the following functions for GLOBIO BIO-PET 056TT:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Globio datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
热性能 - 其它性能
Any use of this information falls under the rules of our disclaimer.
热性能价值单位Test Standard
Other Standards[S]
熔融温度, 10°C/min 255 °C DSC Instrument
S: These properties are reported by the producer according standards that are different to our defaults.
其它性能价值单位Test Standard
Other Standards[S]
Biobased content 30 %
Intrinsic Viscosity 0.645 dl/g
Color L 76 - Nippon DP-1001 Instrument
Color b 1 - Nippon DP-1001 Instrument
S: These properties are reported by the producer according standards that are different to our defaults.
典型数据
加工方法
纤维挤出, 薄膜挤出成型, 片材挤出成型
特征
热稳定性
耐化学试剂
耐环境应力裂纹性
Certifications
生物相容
应用
汽车, 电子电气, 包装
地区供应
北美, 欧洲, 亚太, 中南美洲, 中东/非洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.