Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Elastollan® 1185 A M - (TPU-ARET) - BASF Polyurethanes GmbH

Check here, which other Elastollan datasheets, application examples or technical articles are available in Material Data Center

机械性能 - 其它性能 - 函数

Any use of this information falls under the rules of our disclaimer.

材料文字说明

DESCRIPTION
Elastollan 1185 AM is a polyether based TPU for matt surfaces

SPECIAL PROPERTIES
excellent resistance to hydrolysis and good flexibility at low temperature,
resistance to microbiological attack, good wear performance,
high tensile strength, good damping behavior

TYPICAL APPLICATIONS
cable sheathing

OTHER HINTS
predrying: 2-3h at 100-110°C (air circulating oven) or
80-90°C (dehumidified air dryer),
max. content of humidity before processing: 0,02%
annealing: 20 h at 100°C in order to get optimum properties

CHEMICAL RESISTANCE
For detailed information on the chemical resistance of our
materials refer to this list of chemical resistance

机械性能	价值	单位	Test Standard
ISO数据
100%应变时的应力	7	MPa	ISO 527
300%应变时的应力	12	MPa	ISO 527
断裂应力 TPE	45	MPa	ISO 527
断裂应变 TPE	>300	%	ISO 527
23°C时恒定应变下的永久变形, 24h	35	%	ISO 815
70°C时恒定应变下的永久变形, 24h	45	%	ISO 815
撕裂强度	60	kN/m	ISO 34-1
耐磨性	45	mm³	ISO 4649
肖氏硬度A	88	-	ISO 7619-1
肖氏硬度D	39	-	ISO 7619-1

其它性能	价值	单位	Test Standard
密度	1110	kg/m³	ISO 1183

函数

典型数据

加工方法

异型材挤出成型

地区供应

北美, 欧洲, 亚太, 中南美洲, 中东/非洲

权利义务的法律声明

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.