Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of EDISTIR® RT 461F - PS-I - Versalis S.p.A

Check here, which other Edistir datasheets, application examples or technical articles are available in Material Data Center

加工/物理特性 - 机械性能 - 热性能 - 电性能 - 其它性能 - 试样制备条件 - 加工推荐（注塑） - 函数

Any use of this information falls under the rules of our disclaimer.

材料文字说明

Symbol according to ISO 1043-1: PS-I

Designation: Thermoplastics ISO 2897-PS-I,M,093-06-07-18

High impact, heat resistant polystyrene with good stiffness.

Recommended for improving the thermal performance of injection moulded

technical parts which are submitted to high temperature in service.

Edistir RT 461F is certified BSI 415/94 according to IEC 65-20-2 at 2.5 mm.

Applications:

Cabinet and back cover for TV sets, electrical appliances, ventilator housings.

加工/物理特性	价值	单位	Test Standard
ISO数据
熔体体积流动速度, MVR	4.1	cm³/10min	ISO 1133
温度	200	°C	-
载荷	5	kg	-
熔体密度	950	kg/m³	-
熔体的比热	2050	J/(kg K)	-

机械性能	价值	单位	Test Standard
ISO数据
拉伸模量	2000	MPa	ISO 527
屈服应力	30	MPa	ISO 527
屈服伸长率	1.6	%	ISO 527
名义断裂伸长率	>50	%	ISO 527
无缺口简支梁冲击强度, +23°C	120	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度, +23°C	8	kJ/m²	ISO 179/1eA

热性能	价值	单位	Test Standard
ISO数据
玻璃化转变温度, 10°C/min	97	°C	ISO 11357-1/-2
热变形温度, 1.80 MPa	75	°C	ISO 75-1/-2
维卡软化温度, B	95	°C	ISO 306
线性热膨胀系数, 平行	90	E-6/K	ISO 11359-1/-2
1.5mm名义厚度时的燃烧性	HB	class	IEC 60695-11-10
测试用试样的厚度	1.5	mm	-
Yellow Card 现存	是的	-	-
厚度为h时的燃烧性	HB	class	IEC 60695-11-10
测试用试样的厚度	3.0	mm	-
Yellow Card 现存	是的	-	-

电性能	价值	单位	Test Standard
ISO数据
相对介电常数., 100Hz	2.5	-	IEC 62631-2-1
相对介电常数., 1MHz	2.5	-	IEC 62631-2-1
介质损耗因子, 100Hz	3	E-4	IEC 62631-2-1
介质损耗因子, 1MHz	3	E-4	IEC 62631-2-1
体积电阻率	>1E13	Ohm*m	IEC 62631-3-1
表面电阻率	>1E15	Ohm	IEC 62631-3-2
介电强度	65	kV/mm	IEC 60243-1
相对漏电起痕指数	500	-	IEC 60112

其它性能	价值	单位	Test Standard
吸水性	0.06	%	类似ISO 62
吸湿性	0.04	%	类似ISO 62
密度	1040	kg/m³	ISO 1183

试样制备条件	价值	单位	Test Standard
ISO数据
ISO试样制备条件.	2897	-	ISO ....-2
注塑, 熔体温度	220	°C	ISO 294
注塑, 模具温度	45	°C	ISO 294
注塑, 注射速度	200	mm/s	ISO 294
注塑, 保压压力	70	MPa	ISO 294

加工推荐（注塑）	价值	单位	Test Standard
注塑熔体温度	210 - 260	°C	-
模具温度	20 - 60	°C	-

函数

典型数据

加工方法

注塑

供货形式

粒料

特殊性能

高冲击韧性的/经抗冲改性的

地区供应

北美, 欧洲, 亚太, 中南美洲, 中东/非洲

其他信息

注塑成型

Injection Molding
PREPROCESSING

Drying normally not required

 

PROCESSING

Typical processing temperature range:

    Melt temperature         210 - 260 °C

    Mold temperature          20  -  60 °C

权利义务的法律声明

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.