Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ECOZEN® T95 - Copolyester - SK Chemicals

Material Data Center offers the following functions for ECOZEN® T95:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Ecozen datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 光学特性 - 其它性能
Any use of this information falls under the rules of our disclaimer.
材料文字说明
ECOZEN, conceived and developed by SK Chemicals is a bio-based, heat-resistant, and transparent bio-copolyester.
加工/物理特性价值单位Test Standard
ASTM数据
模压收缩率, 平行 0.0035 mm/mm ASTM D 955
机械性能价值单位Test Standard
ISO数据
屈服应力 45 MPa ISO 527
屈服伸长率 5.3 % ISO 527
断裂应力 52.9 MPa ISO 527
断裂伸长率 219 % ISO 527
弯曲模量, 23°C 1830 MPa ISO 178
弯曲强度 68.4 MPa ISO 178
悬臂梁缺口冲击强度, +23°C 93 kJ/m² ISO 180/1A
ASTM数据
屈服应力 46.1 MPa ASTM D 638
断裂拉伸强度 48 MPa ASTM D 638
屈服伸长率 5.7 % ASTM D 638
断裂伸长率 250 % ASTM D 638
弯曲模量 1962 MPa ASTM D 790
弯曲强度 75.5 MPa ASTM D 790
洛克硬度 R 115 - ASTM D 785
悬臂梁缺口冲击强度, 1/8 in 860 J/m ASTM D 256
热性能价值单位Test Standard
ISO数据
热变形温度, 1.80 MPa 71 °C ISO 75-1/-2
热变形温度, 0.45 MPa 84 °C ISO 75-1/-2
ASTM数据
DTUL @ 66 psi 83 °C ASTM D 648
DTUL @ 264 psi 73 °C ASTM D 648
光学特性价值单位Test Standard
ASTM数据
雾度 1 % ASTM D 1003
光透射率 90 % ASTM D 1003
其它性能价值单位Test Standard
密度 1250 kg/m³ ASTM D 792
典型数据
加工方法
薄膜挤出成型, 片材挤出成型, 吹塑
特殊性能
经热稳处理的/耐热的, 透明.
特征
共聚物
耐化学试剂
通用耐化学性
Certifications
生物相容, 可食品接触的, RoHS
应用
包装
地区供应
北美, 欧洲, 亚太, 中南美洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.